On 14 Jul 00, at 17:41, Rajeev Jha wrote:
> signal 11 is due to flaky RAM/ hardware problem, is a description of
> problem , has anybody been able to fix this problem ? what is a flaky
> RAM and if i have a flaky RAM how do i make it straight ? recently got
> this signal 11 on one of the machines here , though the combination in
Assuming that you have genuine CDs and other hardware like a good CDdrive,
the only cause for SIG 11 is flaky hardware. You might try opening the case
and seeing whether the cards are sitting tight...if not, change the RAM.
When I first installed Linux, my PC had 32 MB RAM which Windows recognised,
but Linux exited with a sig 11. After getting a 64 MB memory stick, install
went off fine. I still use the old 32 MB ram in the other memory
slot...total recognised mem in Linux is 80 MB, Windows shows 96 MB;-)
-Rgds
========================================================================
Sthitaprajna | (at)mailandnews(dot)com | PGP:619E875D
Fingerprint:9A4F 8E01 A4A5 EA1A 41D2 AD1E 75BC 6F0B 619E 875D
"So many people, so little purpose."
-----------------------------------------------------------------------
For information on this and other Linux India mailing lists check out
http://lists.linux-india.org/
