On Sat, 20 Jan 2001, Arun Shrimali saw fit to infom me :
make sure what net cards u have first
for example u have have rtl8139 cards
make sure u have the module loaded using lsmod
or else load the module using
insmod rtl8139
once this is done u can either use
ifconfig eth0 <ipaddr> up
ifconfig eth1 <ipaddr> up
else use netconf to configure eth0 and eth1
regards
yunus
> As suggested by archan, I tried to configure two ethernet card, but
> following problem occurs, pl help
>
> /etc/rc.d/rc3.d/s10 network : /sbin /ipx_configure : cannot execute
> binary file
> eth0 initialization [failed]
> eth1 initialization [failed]
>
> where as i don't want to configure it for IPX as we are using IP only
>
>
>
> Arun
>
> Date sent: Fri, 19 Jan 2001 17:55:50 +0530
> From: archan <[EMAIL PROTECTED]>
> Organization: Open Source Software
> To: [EMAIL PROTECTED]
> Copies to: [EMAIL PROTECTED]
> Subject: Re: [LIH] Configuring 2 ethernet card.
> Send reply to: [EMAIL PROTECTED]
>
> > sorry!! I made some mistakes .... please see the following
> >
> > #cd /etc/sysconfig/network-scripts/
> > #touch ifcfg-eth0
> > #touch ifcfg-eth1
> >
> > write the following inside ifcfg-eth0 file
> > DEVICE=eth0
> > BOOTPROTO=static
> > IPADDR=192.168.0.10
> > NETMASK=255.255.255.0
> > NETMASK=192.168.0.0
> > ONBOOT=yes
> >
> > write the following inside ifcfg-eth1 file
> > DEVICE=eth1
> > BOOTPROTO=static
> > IPADDR=192.168.0.11
> > NETMASK=255.255.255.0
> > NETMASK=192.168.0.0
> > ONBOOT=yes
> >
> > *change the ipaddress accordingly....
> > *it is assumed that both the cards are detected by kernel....
> >
> > then restart the network ...
> > /etc/init.d/network/restart
> >
> > archan
> > [EMAIL PROTECTED]
> > [EMAIL PROTECTED]
> >
> >
> > archan wrote:
> > >
> > > Hi,
> > > the easy soln is configure using linuxconf...
> > >
> > > if u want to do it by hand, then do the following (i personally prefer
> > > this)
> > >
> > > do the following ....
> > > #cd /etc/sysconfig/network-scripts/
> > > #touch ifcfg-eth0
> > > #touch ifcfg-eth1
> > >
> > > write the following inside ifcfg-eth0 file
> > > DEVICE=eth0
> > > BOOTPROTO=static
> > > IPADDR=192.168.0.10
> > > NETMASK=255.255.255.0
> > > NETMASK=192.168.0.0
> > > ONBOOT=yes
> > >
> > > write the following inside ifcfg-eth0 file
> > > DEVICE=eth1
> > > BOOTPROTO=static
> > > IPADDR=192.168.0.10
> > > NETMASK=255.255.255.0
> > > NETMASK=192.168.0.0
> > > ONBOOT=yes
> > >
> > > *change the ipaddress accordingly....
> > > *it is assumed that both the cards are detected by kernel....
> > >
> > > then restart the network ...
> > > /etc/init.d/network/restart
> > >
> > > archan
> > > [EMAIL PROTECTED]
> > > [EMAIL PROTECTED]
> > >
> > >
> > > "Usha S." wrote:
> > > >
> > > > Hello
> > > >
> > > > I have 2 ethernet cards(of same make) in my computer. I have Redhat 6.2
> > > > installed in my machine. Can any of you give me some tips to configure
> > > > both the ethernet cards so that i can use both the cards together. I am
> > > > fine with the configuration of single ethernet card.
> > > >
> > > > Thanks in advance
> > > >
> > > > Usha
> > > >
> > > > *************************************************************************
> > > > Usha. S
> > > > Centre for Artificial Intelligence and Robotics
> > > > Bangalore.- 560 001
> > > >
> > > > # Tel(Work)- 2265406/2262126: Ext- 270
> > >
> > > ----------------------------------------------
> > > The mailing list archives are available at
> > > http://lists.linux-india.org/cgi-bin/wilma/LIH
> >
> > ----------------------------------------------
> > Find out more about this and other Linux India
> > mailing lists at http://lists.linux-india.org/
>
>
>
> ----------------------------------------------
> Find out more about this and other Linux India
> mailing lists at http://lists.linux-india.org/
--
--------------------------------------------------------
@> Yunus Shaikh
/( )\ Email : [EMAIL PROTECTED]
^ ^
----------------------------------------------
The mailing list archives are available at
http://lists.linux-india.org/cgi-bin/wilma/LIH
