At 04:20 AM 1/20/01 -0800, you wrote:
>Arun Shrimali spewed into the ether:
> >As suggested by archan, I tried to configure two ethernet card, but
> >following problem occurs, pl help
> >/etc/rc.d/rc3.d/s10 network : /sbin /ipx_configure : cannot execute
> >binary file
> >eth0 initialization [failed]
> >eth1 initialization [failed]
check the permissions on /sbin/ipx_configure as well ... and see that the
module for your network card is loaded.
>#ifconfig eth0 <ip.for.eth0>
>#ifconfig eth1 <ip.for.eth1>
or /sbin/ifup eth0 and /sbin/ifup eth1
>#route add -net <net.of.internal.interface> netmask <mask.of.int.if> gw
><external.if> metric 1
Then take a look at /var/log/messages - see what other errors are cropping up
--
Suresh Ramasubramanian [ <> ] mallet <@> efn.org
EMail Sturmbannfuhrer, Lower Middle Class Sysadmin
----------------------------------------------
The mailing list archives are available at
http://lists.linux-india.org/cgi-bin/wilma/LIH
