Thanks suresh for info abt linmodems.org i visited the site and downloaded
PCTEL.zip file.
ftp://www.pcchips.com.tw/driver/Linux/MODEM/PCTEL.ZIP
I have unziped and it contains 4 files ending with extension "a" and one
with "o" in the "lib" directory. Two files "ptmodule.c" and "Makefile" is
available in "src/module" directory.
I go to src/module add isse "./Makefile and getting lot errors.
[root@localhost module]# ./Makefile
./Makefile: HPATH: command not found
./Makefile: HPATH: command not found
./Makefile: HPATH: command not found
./Makefile: HPATH: command not found
./Makefile: HPATH: command not found
./Makefile: FINDHPATH: command not found
./Makefile: HPATH: command not found
./Makefile: HOSTCC: command not found
./Makefile: HOSTCFLAGS: command not found
./Makefile: CROSS_COMPILE: command not found
./Makefile: COL_DEBUG_FLAGS: command not found
./Makefile: CROSS_COMPILE: command not found
./Makefile: AS: command not found
./Makefile: CROSS_COMPILE: command not found
./Makefile: LD: command not found
./Makefile: CROSS_COMPILE: command not found
./Makefile: HOSTCFLAGS: command not found
./Makefile: HPATH: command not found
./Makefile: CC: command not found
./Makefile: CC: command not found
./Makefile: CPP: command not found
./Makefile: CROSS_COMPILE: command not found
./Makefile: AR: command not found
./Makefile: CROSS_COMPILE: command not found
./Makefile: NM: command not found
./Makefile: CROSS_COMPILE: command not found
./Makefile: STRIP: command not found
./Makefile: MAKE: command not found
./Makefile: EXTRA_LDFLAGS: command not found
./Makefile: O_TARGET: command not found
./Makefile: O_OBJS: command not found
./Makefile: OX_OBJS: command not found
./Makefile: O_TARGET: command not found
./Makefile: L_TARGET: command not found
./Makefile: all_targets:: command not found
./Makefile: fg: no job control
./Makefile: CC: command not found
./Makefile: CFLAGS: command not found
./Makefile: EXTRA_CFLAGS: command not found
./Makefile: -o: No such file or directory
./Makefile: fg: no job control
./Makefile: line 51: syntax error near unexpected token `$<'
./Makefile: line 51: ` $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<'
What should i do. Also is it uptodate driver for the modem.
Regards,
Boby
> When trying kppp it says "Modem is busy" . Hope it's due to no driver
>Perhaps this is because you just have to turn off the dialtone detection,
>which is intended for US telephones. Put ATX1 in the modem initstring.
>See http://www.linmodems.org for more.
> -suresh
----- Original Message -----
From: Suresh Ramasubramanian <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 25, 2001 3:26 PM
Subject: Re: [LIH] PCTel HSP MicroModem 56 (Internal)
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
