actually the aci7xxx is a very old driver and most of the kernels ahve default support for the same.,....so I wouldnt really suggest trying some other kernel....probably if you could post the details of the logs you are getting when you try to install....then that would help us in determining what is wrong.... > At 10:06 AM 4/21/2004, Karan Singh wrote: >>I tried to install PCQLinux 2004 on an HCL box having SCSI HDD and RAID >> support but failed. Previously, I installed RH 9.0 it was working >> fine.The CD is OK and running well, it shows initial messages and it >> hangs when reaches to SCSI driver with the message "Searching for SCSI >> driver aix7xxx". Please suggest the solution.regards, > > > AIC7xxx is the adaptec SCSI driver. Maybe the default kernel isnt > compiled with SCSI support? Check if there are other kernels available > on the CD. > > srs > > > -- > [EMAIL PROTECTED] (Suresh Ramasubramanian) > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > linux-india-help mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/linux-india-help
-- Best Regards Tom Jose Tharayil [EMAIL PROTECTED] ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
