Hi Zialon,
thankx for your info, but I wanna use the SIR just for connecting my cell phone and I remember from the past that Ircomm have to be automagically loaded but here, with this new Inspiron 8100 supercool beast, it is automagically NOT LOADED... :-))))))))))))))))))))) I have to say that I usually used - with my previous Dell CPT400GT - IrDA only for phone connection and IrLAN. They were ok in my opinion, fast exactly like in Windows. The problem is: in Windows 2000 this new beast work really at 4 MBps when connected dongle against Dongle with my friend Inspiron 8000! they see each others in a moment and Win 2000 automagically (in this case for real!!!) load the file transfer window and in a moment u can transfer files! But for GSM phone connection, IrDA stack work well both in Linux and in Windows: the only difference is in Windows u set all up in one minute (with Linux - solving a problem after another - I usually need two weeks! -, but using Linux looks much more cool in front of your collegues, your friends and your girlfriend!!! :-))))))))))))))))))))))))))))))))))))) Massimo PS: do u know what is the IRDA Utils last version and where do I can downloaded? On Soundforge I just see 0.9.13. ----- Original Message ----- From: "Zailong Bian" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: venerd� 12 ottobre 2001 16:19 Subject: Re: [Linux-IrDA]IrDA over serial driver can fail on new machines chipsets? I have Inspiron 3500!!!! Wow...nice slow machine. But my SIR works after many nights of short sleep. All the howtos seem either out of date or does not fit all situations. I use kernel 2.4.10-ac3. I built everything in modulus if possible. The /etc/modulus.conf says: pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start alias usb-interface usb-uhci alias sound-slot-0 nm256 alias char-major-161 ircomm-tty alias ppp0 off alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp0 ppp_generic alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate I have to setup the SIR in BIOS. Don't use automatic settings. Specify the IRQ/PORT. You will need to remember that settings. When boots, it will say sth like: Serial..... ttyS? Irq ... Port... ttyS? Irq ... Port... One of them is for the SIR. Edit /etc/sysconfig/irda (redhat or mandrake). What you do next is to do a service irda start. It basically starts the irattach with irattach /dev/ttyS? -s. If you run ifconfig, you should see irda0 up. I use irda to talk to my Visor Edge. I made a like from /dev/ircomm0 to /dev/pilot. The polit-link works. BUT IT IS VERY SLOW!!!! Although it says setting speed 115200. But the throughput is like <1kB/sec. The same SIR works much faster in WindowsXP. Well...not perfect, but it is working. I managed to get PPP going between my latop and palm too. Tried ptelnet...but it is too slow. Anyway...good luck. --- Massimo Scabbia <[EMAIL PROTECTED]> wrote: > Hi, > > > laptop swap and IrDA problem as usual!!! :-((( > > Well, my new laptop is a Dell Inspiron 8100... Soooooooo cool :-))) > > But... IrDA not work. Well, it work under Windows 2000, so the port is ok > and stuff, but I'm unable to make the slow SIR driver working under Linux > (never think to try the FIR driver :-((((((((((( ) > > Is the serial driver related with the IrDA chipset of my notebook? On this > machine, Findchip report nothing (I do "findchip -v" and the system reply > nothing, just a blank line). > > To be honest, if I irattach /dev/ttyS1 -s the system load the device Irda0, > but the discovery name of this device is always Dell (the name of my > computer). I can use ifconfig Irda0 up or down, I can Ping the device Irda0 > and also do a Irdadump, but I don't know what I ping :-(((((( > > Ircomm not load, also if I had put the correct stement on Modules.conf and > stuff. Obviously my cell phone is in front of the IrDA dongle as usual. > > Irda-Utils are 0.9.14 precompiled with my Mandrake 8.1 distro and kernel is > default kernel with all the IrDA stuff modularized... > > Any idea? > > > Massimo > > > PS: whats the last irda-utils? On soundforge there is still 0.9.13. The site > seems very outdated and the the new HOWTO at mobilix.org not point at any > new location. > > About the new HOWTO: I think it is pretty mean, very obviously, no hint at > all! I used to prefer the old documents. > > _______________________________________________ > Linux-IrDA mailing list - [EMAIL PROTECTED] > http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda __________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
