I've just gotten my hands on an Armada M700 laptop and wanted to see
if I could get all the featurettes from Windows working under Linux.
Currently running 2.2.14-irda1 and it fails to detect the SMC FIR
controller, although seems to enable SIR mode without any fuss. Which
end should I start digging into in getting the FIR driver alive,
either in me doing something wrongly, or actually poking at the SMC
FIR driver code?
Output from `lspnp -vv 0e`:
0e SMCf010 communications device: RS-232
flags: [dynamic]
allocated resources:
io 0x03e8-0x03ef [16-bit decode]
io 0x0100-0x0107 [16-bit decode]
irq 3 [high edge]
dma 5 [16 bit] [compat]
possible resources:
[start dep fn]
io 0x03f8-0x03f [16-bit decode]
io base 0x0100-0x0130 align 0x10 len 0x08 [16-bit decode]
irq mask 0x00b8 [high edge]
dma mask 0x000c [8 bit] [compat]
[start dep fn]
...
...
[snipped many fairly generic serial configs with dma and iobase 0x100 as above]
Please let me know what more info I can supply to make the easier for
me and others willing to help ;)
cheers,
--
Alexander Hoogerhuis
[EMAIL PROTECTED]
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
