From: Mirza Krak <[email protected]> Add TEGRA30_CLK_NOR to init table and set default rate to 127 MHz which is max rate.
The maximum rate value of 127 MHz is pulled from the downstream L4T kernel. Signed-off-by: Mirza Krak <[email protected]> Tested-by: Marcel Ziswiler <[email protected]> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board --- Changes in v2: - no changes Changes in v3: - Added comment in commit message where I got the maximum rates from. drivers/clk/tegra/clk-tegra30.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index 8e2db5e..67f1677 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -1252,6 +1252,7 @@ static struct tegra_clk_init_table init_table[] __initdata = { { TEGRA30_CLK_SDMMC1, TEGRA30_CLK_PLL_P, 48000000, 0 }, { TEGRA30_CLK_SDMMC2, TEGRA30_CLK_PLL_P, 48000000, 0 }, { TEGRA30_CLK_SDMMC3, TEGRA30_CLK_PLL_P, 48000000, 0 }, + { TEGRA30_CLK_NOR, TEGRA30_CLK_PLL_P, 127000000, 0 }, { TEGRA30_CLK_PLL_M, TEGRA30_CLK_CLK_MAX, 0, 1 }, { TEGRA30_CLK_PCLK, TEGRA30_CLK_CLK_MAX, 0, 1 }, { TEGRA30_CLK_CSITE, TEGRA30_CLK_CLK_MAX, 0, 1 }, -- 2.1.4
