From: Mirza Krak <[email protected]> Add a device node for the GMI controller found on Tegra20.
Signed-off-by: Mirza Krak <[email protected]> Tested-by: Marcel Ziswiler <[email protected]> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board --- Changes in v2: - added address-cells, size-cells and ranges properties Changes in v3: - fixed range address which is not the same as Tegra30. arch/arm/boot/dts/tegra20.dtsi | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 2207c08..b22cddb 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -1,4 +1,4 @@ -#include <dt-bindings/clock/tegra20-car.h> +include <dt-bindings/clock/tegra20-car.h> #include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -376,6 +376,20 @@ status = "disabled"; }; + + gmi@70009000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xd0000000 0xfffffff>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = < &tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; -- 2.1.4
