From: Mirza Krak <[email protected]> Add a device node for the GMI controller found on Tegra30.
Signed-off-by: Mirza Krak <[email protected]> Tested-by: Marcel Ziswiler <[email protected]> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board --- Changes in v2: - added address-cells, size-cells and ranges properties Changes in v3: - no changes arch/arm/boot/dts/tegra30.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 5030065..bbb1c00 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -439,6 +439,19 @@ status = "disabled"; }; + gmi@70009000 { + compatible = "nvidia,tegra30-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x48000000 0x7ffffff>; + clocks = <&tegra_car TEGRA30_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; -- 2.1.4
