Fabien Parent <[email protected]> writes: > Read access to the SPI flash are broken on da850-evm, i.e. the data > read is not what is actually programmed on the flash. > According to the datasheet for the M25P64 part present on the da850-evm, > if the SPI frequency is higher than 20MHz then the READ command is not > usable anymore and only the FAST_READ command can be used to read data. > > This commit specifies in the DTS that we should use FAST_READ command > instead of the READ command. > > Signed-off-by: Fabien Parent <[email protected]>
Tested on da850-evm on top of v4.10-rc3. This gets the DT boot functionatliy in line with the legacy (board-file) boot. Tested-by: Kevin Hilman <[email protected]> Kevin
