Use the new descriptor based GPIO API instead of
the legacy one, which results in cleaner code
with less lines of code.
Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.co.uk>
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 74 +++++++++----------------
1 file changed, 27 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index 1eeb8b0d10c2..8f7463392047 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -22,7 +22,6 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
@@ -59,8 +58,8 @@ struct panel_drv_data {
unsigned long hw_guard_wait; /* max guard time in jiffies */
/* panel HW configuration from DT or platform data */
- int reset_gpio;
- int ext_te_gpio;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *ext_te_gpio;
struct regulator *vpnl;
struct regulator *vddi;
@@ -288,8 +287,8 @@ static int dsicm_enter_ulps(struct panel_drv_data *ddata)
if (r)
goto err;
- if (gpio_is_valid(ddata->ext_te_gpio))
- disable_irq(gpio_to_irq(ddata->ext_te_gpio));
+ if (ddata->ext_te_gpio)
+ disable_irq(gpiod_to_irq(ddata->ext_te_gpio));
in->ops.dsi->disable(in, false, true);
@@ -330,8 +329,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
goto err2;
}
- if (gpio_is_valid(ddata->ext_te_gpio))
- enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+ if (ddata->ext_te_gpio)
+ enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
dsicm_queue_ulps_work(ddata);
@@ -344,8 +343,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
r = dsicm_panel_reset(ddata);
if (!r) {
- if (gpio_is_valid(ddata->ext_te_gpio))
- enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+ if (ddata->ext_te_gpio)
+ enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
ddata->ulps_enabled = false;
}
err1:
@@ -591,16 +590,13 @@ static struct attribute_group dsicm_attr_group = {
static void dsicm_hw_reset(struct panel_drv_data *ddata)
{
- if (!gpio_is_valid(ddata->reset_gpio))
- return;
-
- gpio_set_value(ddata->reset_gpio, 1);
+ gpiod_set_value(ddata->reset_gpio, 1);
udelay(10);
/* reset the panel */
- gpio_set_value(ddata->reset_gpio, 0);
+ gpiod_set_value(ddata->reset_gpio, 0);
/* assert reset */
udelay(10);
- gpio_set_value(ddata->reset_gpio, 1);
+ gpiod_set_value(ddata->reset_gpio, 1);
/* wait after releasing reset */
usleep_range(5000, 10000);
}
@@ -954,7 +950,7 @@ static int dsicm_update(struct omap_dss_device *dssdev,
if (r)
goto err;
- if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
+ if (ddata->te_enabled && ddata->ext_te_gpio) {
schedule_delayed_work(&ddata->te_timeout_work,
msecs_to_jiffies(250));
atomic_set(&ddata->do_update, 1);
@@ -1001,7 +997,7 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata,
bool enable)
else
r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
- if (!gpio_is_valid(ddata->ext_te_gpio))
+ if (!ddata->ext_te_gpio)
in->ops.dsi->enable_te(in, enable);
/* possible panel bug */
@@ -1229,21 +1225,21 @@ static int dsicm_probe_of(struct platform_device *pdev)
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *in;
struct display_timing timing;
- int gpio, err;
+ int err;
- gpio = of_get_named_gpio(node, "reset-gpios", 0);
- if (!gpio_is_valid(gpio)) {
- dev_err(&pdev->dev, "failed to parse reset gpio\n");
- return gpio;
+ ddata->reset_gpio = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ddata->reset_gpio)) {
+ err = PTR_ERR(ddata->reset_gpio);
+ dev_err(&pdev->dev, "reset gpio request failed: %d", err);
+ return err;
}
- ddata->reset_gpio = gpio;
- gpio = of_get_named_gpio(node, "te-gpios", 0);
- if (gpio_is_valid(gpio) || gpio == -ENOENT) {
- ddata->ext_te_gpio = gpio;
- } else {
- dev_err(&pdev->dev, "failed to parse TE gpio\n");
- return gpio;
+ ddata->ext_te_gpio = devm_gpiod_get_optional(&pdev->dev, "te",
+ GPIOD_IN);
+ if (IS_ERR(ddata->ext_te_gpio)) {
+ err = PTR_ERR(ddata->ext_te_gpio);
+ dev_err(&pdev->dev, "TE gpio request failed: %d", err);
+ return err;
}
err = of_get_display_timing(node, "panel-timing", &timing);
@@ -1353,24 +1349,8 @@ static int dsicm_probe(struct platform_device *pdev)
atomic_set(&ddata->do_update, 0);
- if (gpio_is_valid(ddata->reset_gpio)) {
- r = devm_gpio_request_one(dev, ddata->reset_gpio,
- GPIOF_OUT_INIT_LOW, "taal rst");
- if (r) {
- dev_err(dev, "failed to request reset gpio\n");
- goto err_reg;
- }
- }
-
- if (gpio_is_valid(ddata->ext_te_gpio)) {
- r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
- GPIOF_IN, "taal irq");
- if (r) {
- dev_err(dev, "GPIO request failed\n");
- goto err_reg;
- }
-
- r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
+ if (ddata->ext_te_gpio) {
+ r = devm_request_irq(dev, gpiod_to_irq(ddata->ext_te_gpio),
dsicm_te_isr,
IRQF_TRIGGER_RISING,
"taal vsync", ddata);
--
2.13.2
