Now that the comphy driver is available, this patch adds the
corresponding nodes in the cp110 master and slave device trees.

Signed-off-by: Antoine Tenart <antoine.ten...@free-electrons.com>
---
 .../boot/dts/marvell/armada-cp110-master.dtsi      | 38 ++++++++++++++++++++++
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 38 ++++++++++++++++++++++
 2 files changed, 76 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi 
b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 9b2581473183..f2a50552bad4 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -91,6 +91,44 @@
                                };
                        };
 
+                       cpm_comphy: phy@120000 {
+                               compatible = "marvell,comphy-cp110";
+                               reg = <0x120000 0x6000>;
+                               marvell,system-controller = <&cpm_syscon0>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               cpm_comphy0: phy@0 {
+                                       reg = <0>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cpm_comphy1: phy@1 {
+                                       reg = <1>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cpm_comphy2: phy@2 {
+                                       reg = <2>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cpm_comphy3: phy@3 {
+                                       reg = <3>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cpm_comphy4: phy@4 {
+                                       reg = <4>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cpm_comphy5: phy@5 {
+                                       reg = <5>;
+                                       #phy-cells = <1>;
+                               };
+                       };
+
                        cpm_mdio: mdio@12a200 {
                                #address-cells = <1>;
                                #size-cells = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi 
b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index d3902f218c46..bd7f7d0e6de9 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -98,6 +98,44 @@
                                };
                        };
 
+                       cps_comphy: phy@120000 {
+                               compatible = "marvell,comphy-cp110";
+                               reg = <0x120000 0x6000>;
+                               marvell,system-controller = <&cps_syscon0>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               cps_comphy0: phy@0 {
+                                       reg = <0>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cps_comphy1: phy@1 {
+                                       reg = <1>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cps_comphy2: phy@2 {
+                                       reg = <2>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cps_comphy3: phy@3 {
+                                       reg = <3>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cps_comphy4: phy@4 {
+                                       reg = <4>;
+                                       #phy-cells = <1>;
+                               };
+
+                               cps_comphy5: phy@5 {
+                                       reg = <5>;
+                                       #phy-cells = <1>;
+                               };
+                       };
+
                        cps_mdio: mdio@12a200 {
                                #address-cells = <1>;
                                #size-cells = <0>;
-- 
2.13.5

Reply via email to