The following patches add arm pl353 static memory controller driver and nand driver for xilinx zynq soc. The arm pl353 smc supports two interfaces i.e nand and nor/sram memory interfaces. The current implementation supports only a single SMC instance and nand specific configuration.
xilinx zynq TRM link: http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf ARM pl353 smc TRM link: http://infocenter.arm.com/help/topic/com.arm.doc.ddi0380g/DDI0380G_smc_pl350_series_r2p1_trm.pdf Tested Micron MT29F2G08ABAEAWP (On-die capable) and AMD/Spansion S34ML01G1. This latest series make use of ->exec_op() . Referenced the marvel driver as pointed by Miquel. Naga Sureshkumar Relli (4): Devicetree: Add pl353 smc controller devicetree binding information memory: pl353: Add driver for arm pl353 static memory controller Documentation: nand: pl353: Add documentation for controller and driver mtd: rawnand: pl353: Add basic driver for arm pl353 smc nand interface .../bindings/memory-controllers/pl353-smc.txt | 53 + Documentation/mtd/nand/pl353-nand.txt | 99 ++ drivers/memory/Kconfig | 8 + drivers/memory/Makefile | 1 + drivers/memory/pl353-smc.c | 523 +++++++++ drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/Makefile | 3 + drivers/mtd/nand/raw/pl353_nand.c | 1236 ++++++++++++++++++++ include/linux/platform_data/pl353-smc.h | 29 + 9 files changed, 1959 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt create mode 100644 Documentation/mtd/nand/pl353-nand.txt create mode 100644 drivers/memory/pl353-smc.c create mode 100644 drivers/mtd/nand/raw/pl353_nand.c create mode 100644 include/linux/platform_data/pl353-smc.h -- 2.7.4
