On Mon, Nov 26, 2018 at 01:20:43PM +0100, Daniel Lezcano wrote:
> In the case of asymmetric SoC with the same micro-architecture, we
> have a group of CPUs with smaller OPPs than the other group. One
> example is the 96boards dragonboard 820c. There is no dmips/MHz
> difference between both groups, so no need to specify the values in
> the DT. Unfortunately, without these defined, there is no scaling
> capacity computation triggered, so we need to write
> 'capacity-dmips-mhz' for each CPU with the same value in order to
> force the scaled capacity computation.
>
> In order to fix this situation, allocate 'raw_capacity' so the pointer
> is set and the init_cpu_capacity_callback() function can be called.
>
> This was tested on db820c:
> - specified values in the DT (correct results)
> - partial values defined in the DT (error + fallback to defaults)
> - no specified values in the DT (correct results)
>
> correct results are:
> cat /sys/devices/system/cpu/cpu*/cpu_capacity
> 758
> 758
> 1024
> 1024
>
> ... respectively for CPU0, CPU1, CPU2 and CPU3.
>
> That reflects the capacity for the max frequencies 1593600 and 2150400.
>
> Cc: Chris Redpath <chris.redp...@linaro.org>
> Cc: Quentin Perret <quentin.per...@linaro.org>
> Cc: Viresh Kumar <viresh.ku...@linaro.org>
> Cc: Amit Kucheria <amit.kuche...@linaro.org>
> Cc: Nicolas Dechesne <nicolas.deche...@linaro.org>
> Cc: Niklas Cassel <niklas.cas...@linaro.org>
> Reviewed-by: Viresh Kumar <viresh.ku...@linaro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezc...@linaro.org>
> ---
> Documentation/devicetree/bindings/arm/cpu-capacity.txt | 6 ++++++
Acked-by: Rob Herring <r...@kernel.org>
> drivers/base/arch_topology.c | 13 ++++++++++++-
> 2 files changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
> b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
> index 84262cd..f53a3c9 100644
> --- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
> +++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
> @@ -54,6 +54,12 @@ fall back to the default capacity value for every CPU. If
> cpufreq is not
> available, final capacities are calculated by directly using capacity-dmips-
> mhz values (normalized w.r.t. the highest value found while parsing the DT).
>
> +If capacity-dmips-mhz is not specified or if the parsing fails, the
> +default capacity value will be computed against the highest frequency.
> +When all CPUs have the same OPP, they will have the same capacity
> +value otherwise the capacity will be scaled down for CPUs having lower
> +frequencies.
> +
> ===========================================
> 4 - Examples
> ===========================================
> diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
> index fd5325b..e0c5b60 100644
> --- a/drivers/base/arch_topology.c
> +++ b/drivers/base/arch_topology.c
> @@ -243,9 +243,20 @@ static int __init register_cpufreq_notifier(void)
> * until we have the necessary code to parse the cpu capacity, so
> * skip registering cpufreq notifier.
> */
> - if (!acpi_disabled || !raw_capacity)
> + if (!acpi_disabled)
> return -EINVAL;
>
> + if (!raw_capacity) {
> +
> + pr_info("cpu_capacity: No capacity defined in DT, set default "
> + "values to %ld\n", SCHED_CAPACITY_SCALE);
> +
> + raw_capacity = kmalloc_array(num_possible_cpus(),
> + sizeof(*raw_capacity), GFP_KERNEL);
> + if (!raw_capacity)
> + return -ENOMEM;
> + }
> +
> if (!alloc_cpumask_var(&cpus_to_visit, GFP_KERNEL)) {
> pr_err("cpu_capacity: failed to allocate memory for
> cpus_to_visit\n");
> return -ENOMEM;
> --
> 2.7.4
>
