> Hi Borut,
>
> Please add the following line in the commit message (before your
> sign-off) in a V2 of your patch:
>
> fixes: 1bcda09d291081 ("serial: stm32: add support for RS485 hardware
> control mode")
>
> I'm OK with the patch itself.
>
> Erwan.
>
>
> Subject: [PATCH] serial: stm32: fix a recursive locking in
>> stm32_config_rs485
>> Date: Tue, 4 Jun 2019 11:54:51 +0200
>> From: Borut Seljak <[email protected]>
>> CC: Maxime Coquelin <[email protected]>, Alexandre Torgue
>> <[email protected]>, Greg Kroah-Hartman
>> <[email protected]>, [email protected],
>> [email protected], [email protected], Jiri Slaby
>> <[email protected]>, [email protected],
>> [email protected]
>>
>> Remove spin_lock_irqsave in stm32_config_rs485, it cause recursive
>> locking.
>> Already locked in uart_set_rs485_config.
>>
>> Signed-off-by: Borut Seljak <[email protected]>
>> ---
>> drivers/tty/serial/stm32-usart.c | 2 --
>> 1 file changed, 2 deletions(-)
>>
>> diff --git a/drivers/tty/serial/stm32-usart.c
>> b/drivers/tty/serial/stm32-usart.c
>> index e8d7a7bb4339..da373a465f51 100644
>> --- a/drivers/tty/serial/stm32-usart.c
>> +++ b/drivers/tty/serial/stm32-usart.c
>> @@ -107,7 +107,6 @@ static int stm32_config_rs485(struct uart_port
>> *port,
>> bool over8;
>> unsigned long flags;
>> - spin_lock_irqsave(&port->lock, flags);
>> stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
>> port->rs485 = *rs485conf;
>> @@ -147,7 +146,6 @@ static int stm32_config_rs485(struct uart_port
>> *port,
>> }
>> stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
>> - spin_unlock_irqrestore(&port->lock, flags);
>> return 0;
>> }
