Hi Neil,
On Mon, 7 Oct 2019 at 19:50, Neil Armstrong <narmstr...@baylibre.com> wrote:
>
> On 07/10/2019 15:16, Anand Moon wrote:
> > As per schematics add missing VDDCPUA_PWM and VDDCPUB_PWM
> > gpio signal use to enable/disable the pwm regulator for DVFS.
> >
> > Fixes: d14734a04a8a (arm64: dts: meson-g12b-odroid-n2: enable DVFS)
> > Cc: Martin Blumenstingl <martin.blumensti...@googlemail.com>
> > Cc: Jerome Brunet <jbru...@baylibre.com>
> > Cc: Neil Armstrong <narmstr...@baylibre.com>
> > Signed-off-by: Anand Moon <linux.am...@gmail.com>
> > ---
> > arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > index a9a661258886..66262a6ab3fe 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> > @@ -135,6 +135,8 @@
> >
> > regulator-boot-on;
> > regulator-always-on;
> > + /* VDDCPUA_PWM */
> > + enable-gpios = <&gpio GPIOE_1 GPIO_ACTIVE_HIGH>;
> > };
> >
> > vddcpu_b: regulator-vddcpu-b {
> > @@ -154,6 +156,8 @@
> >
> > regulator-boot-on;
> > regulator-always-on;
> > + /* VDDCPUB_PWM */
> > + enable-gpios = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
> > };
> >
> > hub_5v: regulator-hub_5v {
> >
>
> Same as 5V_EN, This GPIO is handled by the BL301 SCP firmware, I'm personally
> against
> adding this to the DT since it's out of control of Linux or any OS.
>
> This GPIO id controlles by the PSCI call to SCP to enable/disable
> the CPU clusters.
>
> Neil
Thanks for your input's.
Best Regards
-Anand
