On Sun, Apr 26, 2020 at 11:36:03AM -0700, Jonathan Bakker wrote:
> The extended mainscaler is only available on FIMC1 and there
> are minimum pixel alignments that differ from the default.
> Additionally, the cam-if interface is available on all three
> while FIMC2 has no rotators. The lcd-wb interface is supported
> on FIMC1.
>
> Signed-off-by: Jonathan Bakker <[email protected]>
> ---
> arch/arm/boot/dts/s5pv210.dtsi | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
> index b3b6ad2889f9..3cbf6c05f42a 100644
> --- a/arch/arm/boot/dts/s5pv210.dtsi
> +++ b/arch/arm/boot/dts/s5pv210.dtsi
> @@ -626,7 +626,7 @@
> clock-names = "fimc",
> "sclk_fimc";
> samsung,pix-limits = <4224 8192 1920 4224>;
> - samsung,mainscaler-ext;
> + samsung,min-pix-alignment = <16 8>;
> samsung,cam-if;
> };
>
> @@ -639,9 +639,11 @@
> <&clocks SCLK_FIMC1>;
> clock-names = "fimc",
> "sclk_fimc";
> - samsung,pix-limits = <4224 8192 1920 4224>;
> samsung,mainscaler-ext;
> + samsung,min-pix-alignment = <1 1>;
> + samsung,pix-limits = <4224 8192 1920 4224>;
The line just moved around. I guess this was not intended?
Best regards,
Krzysztof
> samsung,cam-if;
> + samsung,lcd-wb;
> };
>
> fimc2: fimc@fb400000 {
> @@ -653,9 +655,10 @@
> <&clocks SCLK_FIMC2>;
> clock-names = "fimc",
> "sclk_fimc";
> - samsung,pix-limits = <4224 8192 1920 4224>;
> - samsung,mainscaler-ext;
> - samsung,lcd-wb;
> + samsung,pix-limits = <1920 8192 1280 1920>;
> + samsung,min-pix-alignment = <16 8>;
> + samsung,rotators = <0>;
> + samsung,cam-if;
> };
> };
>
> --
> 2.20.1
>
