-----Original Message-----
From: Wolfram Sang [mailto:w...@the-dreams.de]
Sent: Wednesday, April 29, 2020 3:54 PM
To: Ryan Chen <ryan_c...@aspeedtech.com>
Cc: Brendan Higgins <brendanhigg...@google.com>; Benjamin Herrenschmidt
<b...@kernel.crashing.org>; Joel Stanley <j...@jms.id.au>; Andrew Jeffery
<and...@aj.id.au>; linux-...@vger.kernel.org; open...@lists.ozlabs.org;
linux-arm-ker...@lists.infradead.org; linux-asp...@lists.ozlabs.org;
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v0 linux master] i2c/busses: Avoid i2c interrupt status
clear race condition.
On Wed, Apr 29, 2020 at 11:37:37AM +0800, ryan_chen wrote:
> In AST2600 there have a slow peripheral bus between CPU and i2c
> controller.
> Therefore GIC i2c interrupt status clear have delay timing, when CPU
> issue write clear i2c controller interrupt status.
> To avoid this issue, the driver need have read after write clear at
> i2c ISR.
>
> Signed-off-by: ryan_chen <ryan_c...@aspeedtech.com>
v0? is it a prototype?
[Ryan Chen] It is not prototype it is official patch.
And is there maybe a Fixes: tag for it?
[Ryan Chen] Yes it is a fix patch.
> ---
> drivers/i2c/busses/i2c-aspeed.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-aspeed.c
> b/drivers/i2c/busses/i2c-aspeed.c index 07c1993274c5..f51702d86a90
> 100644
> --- a/drivers/i2c/busses/i2c-aspeed.c
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -603,6 +603,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void
> *dev_id)
> /* Ack all interrupts except for Rx done */
> writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
> bus->base + ASPEED_I2C_INTR_STS_REG);
> + readl(bus->base + ASPEED_I2C_INTR_STS_REG);
> irq_remaining = irq_received;
>
> #if IS_ENABLED(CONFIG_I2C_SLAVE)
> @@ -645,9 +646,11 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void
> *dev_id)
> irq_received, irq_handled);
>
> /* Ack Rx done */
> - if (irq_received & ASPEED_I2CD_INTR_RX_DONE)
> + if (irq_received & ASPEED_I2CD_INTR_RX_DONE) {
> writel(ASPEED_I2CD_INTR_RX_DONE,
> bus->base + ASPEED_I2C_INTR_STS_REG);
> + readl(bus->base + ASPEED_I2C_INTR_STS_REG);
> + }
> spin_unlock(&bus->lock);
> return irq_remaining ? IRQ_NONE : IRQ_HANDLED; }
> --
> 2.17.1
>
