On Mon, Jun 22, 2020 at 04:31:08PM +0800, Qiang Zhao wrote:
> From: Chuanhua Han <chuanhua....@nxp.com>
> 
> Add the dspi support on lx2160
> 
> Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
> Signed-off-by: Bao Xiaowei <xiaowei....@nxp.com>
> Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
> Signed-off-by: Zhao Qiang <qiang.z...@nxp.com>

When you resend patches, please state why.  Should I drop the patches
I just applied and pick up this version instead?

Shawn

> ---
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 39 
> ++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi 
> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index abaeb58..f56172f 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -777,6 +777,45 @@
>                       status = "disabled";
>               };
>  
> +             dspi0: spi@2100000 {
> +                     compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +                     reg = <0x0 0x2100000 0x0 0x10000>;
> +                     interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clockgen 4 7>;
> +                     clock-names = "dspi";
> +                     spi-num-chipselects = <5>;
> +                     bus-num = <0>;
> +                     status = "disabled";
> +             };
> +
> +             dspi1: spi@2110000 {
> +                     compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +                     reg = <0x0 0x2110000 0x0 0x10000>;
> +                     interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clockgen 4 7>;
> +                     clock-names = "dspi";
> +                     spi-num-chipselects = <5>;
> +                     bus-num = <1>;
> +                     status = "disabled";
> +             };
> +
> +             dspi2: spi@2120000 {
> +                     compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +                     reg = <0x0 0x2120000 0x0 0x10000>;
> +                     interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&clockgen 4 7>;
> +                     clock-names = "dspi";
> +                     spi-num-chipselects = <5>;
> +                     bus-num = <2>;
> +                     status = "disabled";
> +             };
> +
>               esdhc0: esdhc@2140000 {
>                       compatible = "fsl,esdhc";
>                       reg = <0x0 0x2140000 0x0 0x10000>;
> -- 
> 2.7.4
> 

Reply via email to