On Mon, Jan 25, 2021 at 8:35 PM Alexandre TORGUE <[email protected]> wrote: > > Hi, > > On 12/23/20 8:13 PM, Jagan Teki wrote: > > MicroGEA STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. > > > > General features: > > - STM32MP157AAC > > - Up to 1GB DDR3L-800 > > - 512MB Nand flash > > - I2S > > > > MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier > > boards for creating complete platform solutions. > > > > Add support for it. > > > > Signed-off-by: Matteo Lisi <[email protected]> > > Signed-off-by: Francesco Utel <[email protected]> > > Signed-off-by: Mirko Ardinghi <[email protected]> > > Signed-off-by: Jagan Teki <[email protected]> > > --- > > .../dts/stm32mp157a-microgea-stm32mp1.dtsi | 147 ++++++++++++++++++ > > 1 file changed, 147 insertions(+) > > create mode 100644 arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi > > > > diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi > > b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi > > new file mode 100644 > > index 000000000000..97d569107bfe > > --- /dev/null > > +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi > > @@ -0,0 +1,147 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > > +/* > > + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved > > + * Copyright (c) 2020 Engicam srl > > + * Copyright (c) 2020 Amarula Solutons(India) > > + */ > > + > > If STM32MP157AAC is soldered onto this board, you should include SoC > dtsi here and no into MicroDev 2.0 board. No ?
No, it's an SoM dtsi. and it can be associated with the respective carrier board and include files are attached in its dts. Please check the next patches on this series. Jagan.
