On 25/06/2025 11:14, Luca Weiss wrote:
Add support for the eUSB2 repeater found on the PMIV0104. There is no default init table for this PMIC, just the board-specific tuning parameters are used on top of the default tuning values.Signed-off-by: Luca Weiss <luca.we...@fairphone.com> --- drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c index 61594739e5b12706775622e1f76af6ad5d2d29bf..3d4cdc4c18becd8efd5015e698b836ad4d7cf18c 100644 --- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c @@ -82,6 +82,14 @@ static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), };+static const struct eusb2_repeater_cfg pmiv0104_eusb2_cfg = {+ /* No PMIC-specific init sequence, only board level tuning via DT */ + .init_tbl = (struct eusb2_repeater_init_tbl_reg[]) {}, + .init_tbl_num = 0, + .vreg_list = pm8550b_vreg_l, + .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), +}; + static const struct eusb2_repeater_cfg smb2360_eusb2_cfg = { .init_tbl = smb2360_init_tbl, .init_tbl_num = ARRAY_SIZE(smb2360_init_tbl), @@ -264,6 +272,10 @@ static const struct of_device_id eusb2_repeater_of_match_table[] = { .compatible = "qcom,pm8550b-eusb2-repeater", .data = &pm8550b_eusb2_cfg, }, + { + .compatible = "qcom,pmiv0104-eusb2-repeater", + .data = &pmiv0104_eusb2_cfg, + }, { .compatible = "qcom,smb2360-eusb2-repeater", .data = &smb2360_eusb2_cfg,
Reviewed-by: Neil Armstrong <neil.armstr...@linaro.org>
