On 12/12/2025 23:55, David Heidelberg via B4 Relay wrote: > From: David Heidelberg <[email protected]> > > Usually, the supply is around 1.2 V, not 1.8 V. Rather remove mention of > voltage from the description. > > Fixes: 849139d46d09 ("media: dt-bindings: media: camss: Fixup vdda regulator > descriptions sdm845") > Signed-off-by: David Heidelberg <[email protected]> > --- > Added only Fixes tag for the initial commit, not all the copy-paste > propagated ones. > --- > Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml | 2 +- > Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml | 2 +- > Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml | 2 +- > Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml | 2 +- > Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml | 2 +- > Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml | 2 +- > 6 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml > b/Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml > index 019caa2b09c32..9009cfe993d75 100644 > --- a/Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml > +++ b/Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml > @@ -130,7 +130,7 @@ properties: > > vdda-pll-supply: > description: > - Phandle to 1.8V regulator supply to PHY refclk pll block. > + Phandle to regulator supply to PHY refclk pll block.
If doing this then also drop all redundant useless information. It is never useful to say that phandle is a phandle and that supply is a regulator supply, so just "PHY refclk PLL block supply". Best regards, Krzysztof
