Hi,

On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherri...@gmail.com> wrote:
> On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote:
>> All phy related programming like enabling/disabling the clocks, powering
>> on/off the phy is taken care of by this driver. It is also used for OTG
>> related functionality like srp.
>>
>> This also includes device tree support for usb2 phy driver and
>> the documentation with device tree binding information is updated.
>>
>> Currently writing to control module register is taken care in this
>> driver which will be removed once the control module driver is in place.
>>
>> Cc: Felipe Balbi <ba...@ti.com>
>> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
>> ---
>>  Documentation/devicetree/bindings/usb/usb-phy.txt |   17 ++
>>  drivers/usb/phy/Kconfig                           |    9 +
>>  drivers/usb/phy/Makefile                          |    1 +
>>  drivers/usb/phy/omap-usb2.c                       |  271 
>> +++++++++++++++++++++
>>  include/linux/usb/omap_usb.h                      |   46 ++++
>>  include/linux/usb/phy_companion.h                 |   34 +++
>>  6 files changed, 378 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt
>>  create mode 100644 drivers/usb/phy/omap-usb2.c
>>  create mode 100644 include/linux/usb/omap_usb.h
>>  create mode 100644 include/linux/usb/phy_companion.h
>>
>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt 
>> b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> new file mode 100644
>> index 0000000..80d4148
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>
> This is a very generic name...
>
>> @@ -0,0 +1,17 @@
>> +USB PHY
>> +
>> +OMAP USB2 PHY
>> +
>> +Required properties:
>> + - compatible: Should be "ti,omap-usb2"
>
> ...for a specific phy. However, I do think a generic binding to describe
> host ctrlr to phy connections is needed.
>
>> + - reg : Address and length of the register set for the device. Also
>> +add the address of control module dev conf register until a driver for
>> +control module is added
>
> The dts should describe the h/w, not what you need for the current
> driver. The 2nd reg field does not belong here.

Indeed. This was discussed and agreed upon as a interim solution till
we have a control module driver in place to write to the control
module register.
>
>> +
>> +This is usually a subnode of ocp2scp to which it is connected.
>
> How is usb port to phy connection described?
Currently the usb controller to phy connection is established only by
type. We have a couple of patches being currently discussed in the
list to establish the connection by phandle.

https://patchwork.kernel.org/patch/1457801/ (Generic PHY Framework:
devm_of_phy_get())
http://www.spinics.net/lists/linux-usb/msg69547.html

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to