On Wed, 2012-10-31 at 23:24 +0100, Harro Haan wrote:
> This chip is for example used in the GuruPlug.
> This patch avoids the following error:
> libertas_sdio: failed to load firmware
> libertas_sdio: probe of mmc0:0001:1 failed with error -5
>
> The fix is based on code in:
> drivers/net/wireless/libertas_uap/uap_sdio_mmc.c
>
> This file can for example be found on the following links:
> http://www.xilka.com/sheeva/2.6/2.6.36/2.6.36.2/source/0002-Driver-for-Marvell-Libertas-8688-SDIO-micro-AP-suppo-2.6.35.patch
> http://www.downloadsnewit.co.uk/kernel-v3.0.7/
>
> I followed the following wiki to setup a working WiFi client mode
> connection on the GuruPlug:
> http://wiki.debian.org/libertas
>
> Signed-off-by: Harro Haan <hrh...@gmail.com>
Acked-by: Dan Williams <d...@redhat.com>
> ---
> drivers/net/wireless/libertas/if_sdio.c | 39
> ++++++++++++++++++++++++--------
> 1 file changed, 30 insertions(+), 9 deletions(-)
>
> Index: linux.git/drivers/net/wireless/libertas/if_sdio.c
> ===================================================================
> --- linux.git.orig/drivers/net/wireless/libertas/if_sdio.c
> +++ linux.git/drivers/net/wireless/libertas/if_sdio.c
> @@ -588,17 +588,38 @@ static int if_sdio_prog_real(struct if_s
> size = fw->size;
>
> while (size) {
> - ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
> - if (ret)
> - goto release;
> + timeout = jiffies + HZ;
> + while (1) {
> + ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
> + if (ret)
> + goto release;
>
> - req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
> - if (ret)
> - goto release;
> + req_size = sdio_readb(card->func, IF_SDIO_RD_BASE,
> + &ret);
> + if (ret)
> + goto release;
> +
> + req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1,
> + &ret) << 8;
> + if (ret)
> + goto release;
> +
> + /*
> + * For SD8688 wait until the length is not 0, 1 or 2
> + * before downloading the first FW block,
> + * since BOOT code writes the register to indicate the
> + * helper/FW download winner,
> + * the value could be 1 or 2 (Func1 or Func2).
> + */
> + if ((size != fw->size) || (req_size > 2))
> + break;
> + if (time_after(jiffies, timeout)) {
> + ret = -ETIMEDOUT;
> + goto release;
> + }
> + mdelay(1);
> + }
>
> - req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret)
> << 8;
> - if (ret)
> - goto release;
> /*
> lbs_deb_sdio("firmware wants %d bytes\n", (int)req_size);
> */
>
> _______________________________________________
> libertas-dev mailing list
> libertas-...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/libertas-dev
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
