On Sun, May 08, 2011 at 06:40:40PM +0000, Thorsten Glaser wrote: > Christian T. Steigies dixit: > > >> ??? Accepted linux-2.6 2.6.38-5 (source all i386) Ben Hutchings > >> http://lists.debian.org/debian-devel-changes/2011/05/msg00736.html > > > >Why don't you cross-compile it? > > I cross-built the kernels I ran for testing the patches, but that > was an exception ??? packages that I upload to Debian are *always* > built natively.
Brave > >How do I get the older versions from Geert's git? I don't see any other > >branches, I only see tags. What is the magic word to get for example the > >2.6.30 > >tree? > > tg@zigo:~/linux-m68k $ git branch -r I did not know about -r, it was not mentioned in the tutorial I read... How do I switch back and forth between different branches? I got a conflict and could not switch back anymore. Then I deleted all files (except .git), I should be able to get everything back with git checkout? Well, I didn't. git newbie here... > >It's been so long, is this the correct way to cross-build linux-m68k? > > sudo cowbuilder --debbuildopts -am68k --binary-arch --build linux*.dsc > is the correct way in Debian (but will build all 6 images and more; it > takes about half a day, cross). I haven't used cowbuilder yet, for debian packages I us this, which I guess is equivalent to your cowbuilder script: DEB_HOST_ARCH=m68k debuild -B -am68k > https://wiki.debian.org/HowToRebuildAnOfficialDebianKernelPackage#Building_only_a_single_kernel_variant > lists another way, where you only ???dpkg-source -x linux*.dsc??? then > ???cd linux-*/??? and ???fakeroot debian/rules binary-arch_m68k_none_amiga??? > I think (but cross parameters might need to be added). This is also > in README.Debian in the source package. Yes, but I am not trying to build a debian package, I try to build directly from linux-m68k. This has worked, only the Amiga complained a missing modules.dep (but I built in the network driver): make ARCH=m68k CROSS_COMPILE=m68k-linux-gnu- make ARCH=m68k CROSS_COMPILE=m68k-linux-gnu- INSTALL_MOD_PATH=/data/m68k modules_install The kernel boots, it configures the network (static). When I try to ping a host on my network, I get this oops(?). A few seconds later I also get the mismatch message I reported earlier (does not show up in dmesg?). PS 2.6.28 did not boot: kernel too old. When was TLS introduced? I'll try to apply the patch you mentioned in your other message. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.39-rc6+ (cts@ima) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 Sun May 8 19:05:46 CEST 2011 [ 0.000000] Enabling workaround for errata I14 [ 0.000000] Amiga hardware found: [A3000] VIDEO BLITTER AMBER_FF AUDIO FLOPPY A3000_SCSI KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA DENISE_HR AGNUS_HR_PAL MAGIC_REKICK ZORRO3 [ 0.000000] Ignoring memory chunk at 0x7000000:0x1000000 before the first chunk [ 0.000000] Fix your bootloader or use a memfile to make use of this area! [ 0.000000] On node 0 totalpages: 28672 [ 0.000000] free_area_init_node: node 0, pgdat 0036ab74, node_mem_map 003f4000 [ 0.000000] DMA zone: 252 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 28420 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28420 [ 0.000000] Kernel command line: root=/dev/sda3 fb=false video=amifb:ntsc-lace BOOT_IMAGE=Work:linux/vmlinux-2.6.39+rc6+ [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 109496k/109496k available (2776k kernel code, 2280k data, 136k init) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Calibrating delay loop... 99.22 BogoMIPS (lpj=496128) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.090000] Security Framework initialized [ 0.090000] TOMOYO Linux initialized [ 0.090000] Mount-cache hash table entries: 512 [ 0.100000] Initializing cgroup subsys ns [ 0.100000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.100000] Initializing cgroup subsys cpuacct [ 0.100000] Initializing cgroup subsys devices [ 0.100000] Initializing cgroup subsys freezer [ 0.110000] devtmpfs: initialized [ 0.120000] NET: Registered protocol family 16 [ 0.170000] bio: create slab <bio-0> at 0 [ 0.180000] SCSI subsystem initialized [ 0.330000] NET: Registered protocol family 2 [ 0.340000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.350000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.350000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.350000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.350000] TCP reno registered [ 0.360000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.360000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.360000] NET: Registered protocol family 1 [ 0.390000] VFS: Disk quotas dquot_6.5.2 [ 0.390000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.410000] NTFS driver 2.1.30 [Flags: R/W]. [ 0.410000] msgmni has been set to 213 [ 0.420000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.420000] io scheduler noop registered [ 0.420000] io scheduler deadline registered [ 0.420000] io scheduler cfq registered (default) [ 0.560000] Console: switching to colour frame buffer device 80x25 [ 0.620000] fb0: Amiga ECS frame buffer device, using 640K of video memory [ 0.640000] Amiga-builtin serial driver version 4.30 [ 0.650000] ttyS0 is the amiga builtin serial port [ 0.660000] FD: probing units [ 0.660000] found [ 0.670000] fd: drive 0 didn't identify, setting default ffffffff [ 0.680000] fd0 [ 0.790000] brd: module loaded [ 0.800000] Uniform Multi-Platform E-IDE driver [ 0.810000] ide-gd driver 1.18 [ 0.820000] ide-cd driver 5.00 [ 0.830000] fd: drive 0 didn't identify, setting default ffffffff [ 0.850000] wd33c93-0: chip=WD33c93A/0 no_sync=0xff no_dma=0 debug_flags=0x00 [ 0.860000] setup_args=,,,,,,,,,, [ 0.880000] Version 1.26++ - 10/Feb/2007, Compiled May 8 2011 at 18:59:13 [ 0.890000] scsi0 : Amiga 3000 built-in SCSI [ 0.910000] Zorro: Probing AutoConfig expansion devices: 2 devices [ 0.930000] eth0: Ariadne II at 0x00e90000, Ethernet Address 00:60:30:00:41:5b [ 0.940000] mousedev: PS/2 mouse device common for all mice [ 0.960000] input: amiga-keyboard as /devices/platform/amiga-keyboard/input/input0 [ 0.970000] input: amiga-mouse as /devices/platform/amiga-mouse/input/input1 [ 1.000000] TCP cubic registered [ 1.010000] NET: Registered protocol family 17 [ 1.020000] NET: Registered protocol family 15 [ 1.030000] Registering the dns_resolver key type [ 1.040000] registered taskstats version 1 [ 1.050000] scsi: waiting for bus probes to complete ... [ 1.410000] sending SDTR 0103015e00 0103015e00 sync_xfer=30 [ 1.430000] scsi 0:0:3:0: CD-ROM TOSHIBA CD-ROM XM-5701TA 0167 PQ: 0 ANSI: 2 [ 1.680000] sending SDTR 0103015e00 0103015e00 sync_xfer=30 [ 1.710000] scsi 0:0:6:0: Direct-Access ST325082 4A 3.AA PQ: 0 ANSI: 2 [ 1.750000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.770000] sd 0:0:6:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.780000] sd 0:0:6:0: [sda] Write Protect is off [ 1.790000] sd 0:0:6:0: [sda] Mode Sense: 03 00 00 08 [ 1.800000] sd 0:0:6:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.850000] sda: RDSK (512) sda1 (DOS^C)(res 2 spb 1) sda2 (DOS^C)(res 2 spb 1) sda3 (LNX^@)(res 2 spb 1) sda4 (LNX^@)(res 2 spb 1) sda5 (LNX^@)(res 2 spb 1) sda6 (LNX^@)(res 2 spb 1) sda7 (LNX^@)(res 2 spb 1) sda8 (SWP^@)(res 2 spb 1) [ 1.890000] sd 0:0:6:0: [sda] Attached SCSI disk [ 1.940000] EXT3-fs: barriers not enabled [ 1.960000] kjournald starting. Commit interval 5 seconds [ 1.970000] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 1.980000] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 2.030000] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. [ 13.180000] udevd (74): /proc/74/oom_adj is deprecated, please use /proc/74/oom_score_adj instead. [ 33.560000] Z2RAM: using 0K Zorro II RAM and 1152K Chip RAM (Total 1152K) [ 46.140000] Adding 2096092k swap on /dev/sda8. Priority:-1 extents:1 across:2096092k [ 48.550000] EXT3-fs (sda3): using internal journal [ 130.870000] eth0: trigger_send() called with the transmitter busy. [ 132.240000] ------------[ cut here ]------------ [ 132.240000] WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0x1ac/0x1cc() [ 132.250000] NETDEV WATCHDOG: eth0 (): transmit queue 0 timed out [ 132.260000] Modules linked in: [ 132.260000] Call Trace: [<0002a162>] warn_slowpath_common+0x48/0x6a [ 132.270000] [<0002a170>] warn_slowpath_common+0x56/0x6a [ 132.280000] [<0002a1fc>] warn_slowpath_fmt+0x2a/0x32 [ 132.290000] [<002511a2>] dev_watchdog+0x1ac/0x1cc [ 132.290000] [<002511a2>] dev_watchdog+0x1ac/0x1cc [ 132.300000] [<0003373a>] cascade+0x0/0xb0 [ 132.310000] [<00023c0e>] update_rq_clock+0x24/0x5c [ 132.310000] [<0000ffff>] stanh+0x103/0x140 [ 132.320000] [<0000ffff>] stanh+0x103/0x140 [ 132.320000] [<000338ea>] run_timer_softirq+0x100/0x2ba [ 132.330000] [<0000ffff>] stanh+0x103/0x140 [ 132.340000] [<0005b1d4>] rcu_bh_qs+0x0/0x5a [ 132.340000] [<002b2b42>] printk+0x0/0x18 [ 132.350000] [<00004106>] m68k_handle_int+0x0/0x32 [ 132.350000] [<00250ff6>] dev_watchdog+0x0/0x1cc [ 132.360000] [<0002ee26>] __do_softirq+0x6e/0xd2 [ 132.370000] [<002b2f1a>] schedule+0x0/0x450 [ 132.370000] [<0002ef5a>] do_softirq+0x28/0x2c [ 132.380000] [<000026d0>] ret_from_exception+0x0/0xc [ 132.390000] [<00002aaa>] default_idle+0x0/0xc [ 132.390000] [<00002cca>] cpu_idle+0x16/0x20 [ 132.400000] [<002b2b42>] printk+0x0/0x18 [ 132.410000] [<003b012a>] start_kernel+0x37e/0x38a [ 132.410000] [<00006aee>] devm_free_irq+0x1c/0x56 [ 132.420000] [<00006aee>] devm_free_irq+0x1c/0x56 [ 132.420000] [<003af2fc>] _sinittext+0x2fc/0x988 [ 132.430000] [ 132.430000] ---[ end trace baa6881e53412090 ]--- [ 132.440000] eth0: Tx timed out, excess collisions. TSR=0xff, ISR=0xff, t=57. [ 132.870000] eth0: trigger_send() called with the transmitter busy. [ 134.240000] eth0: Tx timed out, excess collisions. TSR=0xff, ISR=0xff, t=34. [ 134.900000] eth0: trigger_send() called with the transmitter busy. [ 136.240000] eth0: Tx timed out, excess collisions. TSR=0xff, ISR=0xff, t=34. [ 136.930000] eth0: trigger_send() called with the transmitter busy. [ 138.240000] eth0: Tx timed out, excess collisions. TSR=0xff, ISR=0xff, t=31. [ 138.930000] eth0: trigger_send() called with the transmitter busy. [ 140.240000] eth0: Tx timed out, excess collisions. TSR=0xff, ISR=0xff, t=28. [ 140.960000] eth0: trigger_send() called with the transmitter busy. [ 142.240000] eth0: Tx timed out, excess collisions. TSR=0xff, ISR=0xff, t=28. Christian -- To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
