Hi Marek,
On Fri, 2018-05-18 at 18:21 +0200, Marek Vasut wrote:
> On 05/18/2018 05:51 PM, Philipp Zabel wrote:
> > Hi Marek,
> >
> > On Sat, 2018-04-07 at 15:04 +0200, Marek Vasut wrote:
> > > The BT1120 interlaced CCIR codes are the same as BT656 ones
> > > and different than BT656 progressive CCIR codes, fix this.
> >
> > thank you for the patch, and sorry for the delay.
> >
> > > Signed-off-by: Marek Vasut <[email protected]>
> > > Cc: Steve Longerbeam <[email protected]>
> > > Cc: Philipp Zabel <[email protected]>
> > > ---
> > > drivers/gpu/ipu-v3/ipu-csi.c | 8 ++++++--
> > > 1 file changed, 6 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c
> > > index caa05b0702e1..301a729581ce 100644
> > > --- a/drivers/gpu/ipu-v3/ipu-csi.c
> > > +++ b/drivers/gpu/ipu-v3/ipu-csi.c
> > > @@ -435,12 +435,16 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
> > > break;
> > > case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR:
> > > case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR:
> > > - case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_DDR:
> > > - case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR:
> > > ipu_csi_write(csi, 0x40030 | CSI_CCIR_ERR_DET_EN,
> > > CSI_CCIR_CODE_1);
> > > ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
> > > break;
> > > + case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_DDR:
> > > + case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR:
> > > + ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN,
> > > CSI_CCIR_CODE_1);
> > > + ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2);
> > > + ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
> >
> > If these are the same as BT656 codes (so this case would be for PAL?),
> > could this just be moved up into the IPU_CSI_CLK_MODE_CCIR656_INTERLACED
> > case? Would the NTSC CCIR codes be the same as well?
>
> Dunno, I don't have any NTSC device to test. But the above was tested
> with a PAL device I had.
>
> I think the CCIR codes are different from BT656, although I might be wrong.
The driver currently has:
case IPU_CSI_CLK_MODE_CCIR656_INTERLACED:
if (mbus_fmt->width == 720 && mbus_fmt->height == 576) {
/*
* PAL case
*
* Field0BlankEnd = 0x6, Field0BlankStart = 0x2,
* Field0ActiveEnd = 0x4, Field0ActiveStart = 0
* Field1BlankEnd = 0x7, Field1BlankStart = 0x3,
* Field1ActiveEnd = 0x5, Field1ActiveStart = 0x1
*/
height = 625; /* framelines for PAL */
ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN,
CSI_CCIR_CODE_1);
ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2);
ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
} else if (mbus_fmt->width == 720 && mbus_fmt->height == 480) {
/*
* NTSC case
*
* Field0BlankEnd = 0x7, Field0BlankStart = 0x3,
* Field0ActiveEnd = 0x5, Field0ActiveStart = 0x1
* Field1BlankEnd = 0x6, Field1BlankStart = 0x2,
* Field1ActiveEnd = 0x4, Field1ActiveStart = 0
*/
height = 525; /* framelines for NTSC */
ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN,
CSI_CCIR_CODE_1);
ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2);
ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
} else {
dev_err(csi->ipu->dev,
"Unsupported CCIR656 interlaced video mode\n");
spin_unlock_irqrestore(&csi->lock, flags);
return -EINVAL;
}
break;
The PAL codes are exactly the same as in your patch. That's why I wonder
whether we should just move
case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_DDR:
case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR:
up before
case IPU_CSI_CLK_MODE_CCIR656_INTERLACED:
as follows:
----------8<----------
diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c
index caa05b0702e1..7e96382f9cb1 100644
--- a/drivers/gpu/ipu-v3/ipu-csi.c
+++ b/drivers/gpu/ipu-v3/ipu-csi.c
@@ -396,6 +396,8 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
break;
case IPU_CSI_CLK_MODE_CCIR656_INTERLACED:
+ case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_DDR:
+ case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR:
if (mbus_fmt->width == 720 && mbus_fmt->height == 576) {
/*
* PAL case
@@ -435,8 +437,6 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
break;
case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR:
case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR:
- case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_DDR:
- case IPU_CSI_CLK_MODE_CCIR1120_INTERLACED_SDR:
ipu_csi_write(csi, 0x40030 | CSI_CCIR_ERR_DET_EN,
CSI_CCIR_CODE_1);
ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
---------->8----------
Does this work for you?
regards
Philipp
