2009/11/10 Devin Heitmueller <dheitmuel...@kernellabs.com>:
> On Tue, Nov 10, 2009 at 4:39 AM, Valerio Bontempi
> <valerio.bonte...@gmail.com> wrote:
>> Yes I rebooted the system after compiling and installing through 'make
>> install' last v4l-dvb source, but with no luck, /dev/dvb device is
>> still not present.
>> Attached you can find the full dmesg, since system boot
>> Thanks a lot again.
>> P.s. Sorry for top posting, it's gmail0s default and sometimes I forget.
> Hello Valerio,
> Now that I have taken another look at the dmesg output, I see that
> this device is 0ccd:0043 and *not* 0ccd:0042.  This prompted me to
> take another look at the driver, and indeed that board is not
> presently supported.  It's the DVB only version of the board (as
> opposed to the hybrid).
> I can probably make it work, but it's a rather old board and not
> terribly high on my list of priorities.
> Devin
> --
> Devin J. Heitmueller - Kernel Labs
> http://www.kernellabs.com

Hi Devin,

I feared about that
So, in this moment my only possibilities available to make it work are:
- use an older kernel (<=2.6.27) to compile successfully em28xx-new
(maybe it could be better to use older linux distro)
- make em28xx-new to compile on 2.6.31 kernel version
- wait for device support on next kernel releases

I have good programming knowledge, but few with C and driver
programming, so if you can suggest me how can I modify em28xx-new
sources to make them work on 2.6.31, then I can try to adjust them and
then make this driver available just waiting for kernel support.

Thanks a lot

To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to