Em 25-10-2010 18:24, Florian Klink escreveu: > Hi Mauro, > > thanks for your answer!
I'm c/c the mailing list, as this info may be useful for the others. It would be nice to have this added to wiki, but I won't have time for it, unfortunately. > >> Maybe the amux is wrong. The only way to know for sure is to check >> the used GPIO's, >> via a USB snoop dump. Please take a look at linuxtv.org Wiki (search >> for usbsnoop). >> After getting the dump, please parse it and send me. > > I did the usbsnooping and hope I did the parsing right (At least the log > file shrinked from 100MB to some KB, and there are plenty of EM28XX > strings inside ;-)) > > You can get it here: http://pastebin.com/SXKfLUny There are a few things that are relevant: First of all, GPIO's. They enable/disable parts of the board: $ grep GPIO /tmp/dump em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); em28xx_read_reg(dev, EM28XX_R08_GPIO); /* read 0xff */ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); em28xx_read_reg(dev, EM28XX_R08_GPIO); /* read 0xfd */ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); em28xx_read_reg(dev, EM28XX_R08_GPIO); /* read 0xfd */ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d); em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x2a); em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x2a); Currently, they're not touched for this device. Perhaps, we might need to initialize them to 0xfd for capture mode, and 0x2a for sleep mode. In this specific case, maybe it is just safe to keep it as-is, as I suspect that GPIO's are not used on this device. I may be wrong, though. A simple test will tell. The audio entries are related to the ac97 chip. The driver will basically run this code: amux = EM28XX_AMUX_VIDEO2; /* from Terratec Grabby entry, at em28xx-cards.c */ static struct em28xx_vol_table inputs[] = { { EM28XX_AMUX_VIDEO, AC97_VIDEO_VOL }, { EM28XX_AMUX_LINE_IN, AC97_LINEIN_VOL }, { EM28XX_AMUX_PHONE, AC97_PHONE_VOL }, { EM28XX_AMUX_MIC, AC97_MIC_VOL }, { EM28XX_AMUX_CD, AC97_CD_VOL }, { EM28XX_AMUX_AUX, AC97_AUX_VOL }, { EM28XX_AMUX_PCM_OUT, AC97_PCM_OUT_VOL }, if (amux == inputs[i].mux) ret = em28xx_write_ac97(dev, inputs[i].reg, 0x0808); /* Put the volume in 50% */ else ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000); /* Mute the volume */ Any mixer entry equal or bigger than 0x8000 is muted. $ grep 97 dump em28xx_read_ac97(dev, AC97_VENDOR_ID1); /* read 0x0x8384 */ em28xx_read_ac97(dev, AC97_VENDOR_ID2); /* read 0x0x7652 */ em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_reg(dev, EM28XX_R42_AC97ADDR, 0x16); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >From the logs, the only mixer line used on this device is: em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); So, I think that the correct value, at em28xx-cards.c is: amux = EM28XX_AMUX_LINE_IN, Ok, could you please test the enclosed patch? Please test it with both Composite and S-Video entries. Cheers, Mauro --- em28xx: fix Terratec Grabby lack of sound Audio mux were pointing to the wrong line entry. Reported-by: Florian Klink <flo...@flokli.de> diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 5485923..afb206b 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1633,11 +1633,11 @@ struct em28xx_board em28xx_boards[] = { .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = SAA7115_COMPOSITE0, - .amux = EM28XX_AMUX_VIDEO2, + .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, - .amux = EM28XX_AMUX_VIDEO2, + .amux = EM28XX_AMUX_LINE_IN, } }, }, [EM2860_BOARD_TERRATEC_AV350] = { -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
