Sébastien RAILLARD (COEXSI) writes: > CineS2 v6 + 2 CAM Readers > > +----------------+ > Tuner 0 -> Input 0 -> | | > | Port 0 - TAB 1 | -> Output 0 > Tuner 1 -> Input 1 -> | DVB-S2 | > +----------------+ > Input 2 -> | | > | Port 1 - TAB 2 | -> Output 1 > Input 3 -> | | > +----------------+ > CAM 0 -> Input 4 -> | | > | Port 2 - TAB 3 | -> Output 2 -> CAM 0 > Input 5 -> | CAM | > +----------------+ > CAM 1 -> Input 6 -> | | > | Port 3 - TAB 4 | -> Output 3 -> CAM 1 > Input 7 -> | CAM | > +----------------+ > > Two redirections to set : > > * "X0 X2" (input #0 to port #2) > * "X1 X3" (input #1 to port #3) > > Where X is the device number.
Correct, except that the CineS2 V6 only has TAB2 and TAB3 on board. Btw., I also added the module parameter adapter_alloc, which lets you specifiy how many adapters are to be allocated: 0 = one adapter per io if modules are present 1 = one adapter for each tab on which a module was detected 2 = one per tab even if no modules were detected 3 = one adapter for all devices of one card If you use adapter_alloc=3 for a config like above (2 tuners 2 CAMS) you will get all the devices in one /dev/dvb/adapterX/ and most programs should now work with CI out of the box (at least with the first tuner) if the redirections are set properly. Regards, Ralph -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
