On 08/21/2013 08:34 AM, Arun Kumar K wrote:
> This patch adds subdev driver for Samsung S5K4E5 raw image sensor.
> Like s5k6a3, it is also another fimc-is firmware controlled
> sensor. This minimal sensor driver doesn't do any I2C communications
> as its done by ISP firmware. It can be updated if needed to a
> regular sensor driver by adding the I2C communication.
>
> Signed-off-by: Arun Kumar K <arun...@samsung.com>
> Reviewed-by: Sylwester Nawrocki <s.nawro...@samsung.com>
> ---
> .../devicetree/bindings/media/i2c/s5k4e5.txt | 43 +++
> drivers/media/i2c/Kconfig | 8 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/s5k4e5.c | 361
> ++++++++++++++++++++
> 4 files changed, 413 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/s5k4e5.txt
> create mode 100644 drivers/media/i2c/s5k4e5.c
>
...
> diff --git a/drivers/media/i2c/s5k4e5.c b/drivers/media/i2c/s5k4e5.c
> new file mode 100644
> index 0000000..0a6ece6
> --- /dev/null
> +++ b/drivers/media/i2c/s5k4e5.c
> @@ -0,0 +1,361 @@
> +/*
> + * Samsung S5K4E5 image sensor driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Arun Kumar K <arun...@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/gpio.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/videodev2.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define S5K4E5_SENSOR_MAX_WIDTH 2576
> +#define S5K4E5_SENSOR_MAX_HEIGHT 1930
> +
> +#define S5K4E5_SENSOR_ACTIVE_WIDTH 2560
> +#define S5K4E5_SENSOR_ACTIVE_HEIGHT 1920
> +
> +#define S5K4E5_SENSOR_MIN_WIDTH (32 + 16)
> +#define S5K4E5_SENSOR_MIN_HEIGHT (32 + 10)
> +
> +#define S5K4E5_DEF_WIDTH 1296
> +#define S5K4E5_DEF_HEIGHT 732
> +
> +#define S5K4E5_DRV_NAME "S5K4E5"
> +#define S5K4E5_CLK_NAME "mclk"
> +
> +#define S5K4E5_NUM_SUPPLIES 2
> +
> +#define S5K4E5_DEF_CLK_FREQ 24000000
> +
> +/**
> + * struct s5k4e5 - s5k4e5 sensor data structure
> + * @dev: pointer to this I2C client device structure
> + * @subdev: the image sensor's v4l2 subdev
> + * @pad: subdev media source pad
> + * @supplies: image sensor's voltage regulator supplies
> + * @gpio_reset: GPIO connected to the sensor's reset pin
> + * @lock: mutex protecting the structure's members below
> + * @format: media bus format at the sensor's source pad
> + */
> +struct s5k4e5 {
> + struct device *dev;
> + struct v4l2_subdev subdev;
> + struct media_pad pad;
> + struct regulator_bulk_data supplies[S5K4E5_NUM_SUPPLIES];
> + int gpio_reset;
> + struct mutex lock;
> + struct v4l2_mbus_framefmt format;
> + struct clk *clock;
> + u32 clock_frequency;
> +};
> +
> +static const char * const s5k4e5_supply_names[] = {
> + "svdda",
> + "svddio"
> +};
I'm no regulator expert, but shouldn't this list come from the DT or
platform_data?
Or are these names specific to this sensor?
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
