Hi Guennadi,
On Tuesday 30 December 2014 09:36:31 Guennadi Liakhovetski wrote:
> Hi Laurent,
>
> First of all, sorry, I am currently on a holiday, so, replies are delayed,
> real work (reviewing or anything else) is impossible.
Sure, no worries. Enjoy your holidays without thinking too much about soc-
camera :-)
> On Tue, 30 Dec 2014, Laurent Pinchart wrote:
> > On Friday 26 December 2014 11:38:11 Guennadi Liakhovetski wrote:
> >> On Fri, 26 Dec 2014, Laurent Pinchart wrote:
> >>> On Friday 26 December 2014 10:14:26 Guennadi Liakhovetski wrote:
> >>>> On Fri, 26 Dec 2014, Laurent Pinchart wrote:
> >>>>> On Friday 26 December 2014 14:37:14 Josh Wu wrote:
> >
> > [snip]
> >
> >>>>> Talking about mclk and xvclk is quite confusing. There's no mclk
> >>>>> from an ov2640 point of view. The ov2640 driver should call
> >>>>> v4l2_clk_get("xvclk").
> >>>>
> >>>> Yes, I also was thinking about this, and yes, requesting a "xvclk"
> >>>> clock would be more logical. But then, as you write below, if we let
> >>>> the v4l2_clk wrapper first check for a CCF "xvclk" clock, say, none is
> >>>> found. How do we then find the exported "mclk" V4L2 clock? Maybe
> >>>> v4l2_clk_get() should use two names?..
> >>>
> >>> Given that v4l2_clk_get() is only used by soc-camera drivers and that
> >>> they all call it with the clock name set to "mclk", I wonder whether we
> >>> couldn't just get rid of struct v4l2_clk.id and ignore the id argument
> >>> to v4l2_clk_get() when CCF isn't available. Maybe we've overdesigned
> >>> v4l2_clk :-)
> >>
> >> Sure, that'd be fine with me, if everyone else agrees.
> >
> > Can you submit a patch ? That's the best way to find out if anyone
> > objects.
>
> Can do, sure, once I am back home and find time for this.
>
> > [snip]
> >
> >>>>> v4l2_clk_get() should try to get the clock from CCF with a call to
> >>>>> clk_get() first, and then look at the list of v4l2-specific clocks.
> >>>>
> >>>> Yes, how will it find the "mclk" when "xvclk" (or any other name) is
> >>>> requested? We did discuss this in the beginning and agreed to use a
> >>>> fixed clock name for the time being...
> >>>
> >>> Please see above.
> >>>
> >>>>> That's at least how I had envisioned it when v4l2_clk_get() was
> >>>>> introduced. Let's remember that v4l2_clk was designed as a temporary
> >>>>> workaround for platforms not implementing CCF yet. Is that still
> >>>>> needed, or could be instead just get rid of it now ?
> >>>>
> >>>> I didn't check, but I don't think all platforms, handled by
> >>>> soc-camera, support CCF yet.
> >>>
> >>> After a quick check it looks like only OMAP1 and SH Mobile are
> >>> missing. Atmel, MX2, MX3 and R-Car all support CCF. PXA27x has CCF
> >>> support but doesn't enable it yet for an unknown (to me) reason.
On a side note, patches to enable CCF for PXA27x have been posted, they should
be merged in v3.20.
> >>> The CEU driver is used on both arch/sh and arch/arm/mach-shmobile. The
> >>> former will most likely never receive CCF support, and the latter is
> >>> getting fixed. As arch/sh isn't maintained anymore I would be fine
> >>> with dropping CEU support for it.
> >>>
> >>> OMAP1 is thus the only long-term show-stopper. What should we do with
> >>> it ?
> >>
> >> Indeed, what should we? :)
> >
> > You're listed as the soc-camera maintainer, so you should provide an
> > answer to that question :-)
>
> Thanks for ar reminder;)
>
> > I'll propose one, let's drop the omap1-camera driver (I've
> > CC'ed the original author of the driver to this e-mail).
>
> Let's see what they reply, but I don't tgink Josh will want to wait that
> long. And until omap1 is in the mainline we cannot drop v4l2_clk.
Agreed, this was more of a question for the next step.
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
