On 04/23/2015 03:03 PM, Kamil Debski wrote:
> From: Hans Verkuil <hansv...@cisco.com>
>
> The added HDMI CEC framework provides a generic kernel interface for
> HDMI CEC devices.
>
> Signed-off-by: Hans Verkuil <hansv...@cisco.com>
> [k.deb...@samsung.com: Merged CEC Updates commit by Hans Verkuil]
> [k.deb...@samsung.com: Merged Update author commit by Hans Verkuil]
> [k.deb...@samsung.com: change kthread handling when setting logical
> address]
> [k.deb...@samsung.com: code cleanup and fixes]
> [k.deb...@samsung.com: add missing CEC commands to match spec]
> [k.deb...@samsung.com: add RC framework support]
> [k.deb...@samsung.com: move and edit documentation]
> [k.deb...@samsung.com: add vendor id reporting]
> [k.deb...@samsung.com: add possibility to clear assigned logical
> addresses]
> [k.deb...@samsung.com: documentation fixes, clenaup and expansion]
> [k.deb...@samsung.com: reorder of API structs and add reserved fields]
> [k.deb...@samsung.com: fix handling of events and fix 32/64bit timespec
> problem]
> [k.deb...@samsung.com: add cec.h to include/uapi/linux/Kbuild]
> Signed-off-by: Kamil Debski <k.deb...@samsung.com>
> ---
> Documentation/cec.txt | 396 ++++++++++++++++
> drivers/media/Kconfig | 6 +
> drivers/media/Makefile | 2 +
> drivers/media/cec.c | 1161
> +++++++++++++++++++++++++++++++++++++++++++++
> include/media/cec.h | 140 ++++++
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/cec.h | 303 ++++++++++++
> 7 files changed, 2009 insertions(+)
> create mode 100644 Documentation/cec.txt
> create mode 100644 drivers/media/cec.c
> create mode 100644 include/media/cec.h
> create mode 100644 include/uapi/linux/cec.h
>
> diff --git a/Documentation/cec.txt b/Documentation/cec.txt
> new file mode 100644
> index 0000000..2b6c08a
> --- /dev/null
> +++ b/Documentation/cec.txt
> @@ -0,0 +1,396 @@
> +- CEC_G_ADAP_LOG_ADDRS and CEC_S_ADAP_LOG_ADDRS
> +
> +These ioctl are used to configure the logical addresses of the CEC adapter.
> +
> +#define CEC_G_ADAP_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs)
> +#define CEC_S_ADAP_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs)
> +
> +The struct cec_log_addrs is following:
> +
> +struct cec_log_addrs {
> + __u8 cec_version;
> + __u8 num_log_addrs;
> + __u8 primary_device_type[CEC_MAX_LOG_ADDRS];
> + __u8 log_addr_type[CEC_MAX_LOG_ADDRS];
> + __u8 log_addr[CEC_MAX_LOG_ADDRS];
> +
> + /* CEC 2.0 */
> + __u8 all_device_types;
> + __u8 features[CEC_MAX_LOG_ADDRS][12];
> +
> + __u8 reserved[9];
> +};
> +
> +The cec_version determines which CEC version should be used.
> +
> +/* The CEC version */
> +#define CEC_VERSION_1_4B 5
> +#define CEC_VERSION_2_0 6
> +
> +It will try to claim num_log_addrs devices. The log_addr_type array has
> +the logical address type that needs to be claimed for that device, and
> +the log_addr array will receive the actual logical address that was
> +claimed for that device or 0xff if no address could be claimed.
> +
> +The primary_device_type contains the primary device for each logical
> +address.
> +
> +For CEC 2.0 devices fill in the all_device_types parameter to use with the
> +Report Features command, and fill in the 'features' which contains the
> +remaining parameters (RC Profile and Device Features) to use in Report
> +Features.
> +
> +An error is returned if the adapter is disabled or if there
> +is no physical address assigned or if the cec_version is unknown.
> +
> +If no logical address of one or more of the given types could be claimed,
> +then log_addr will be set to CEC_LOG_ADDR_INVALID.
This does not appear to be the case looking at the cec_config_log_addrs
function.
I don't see it being set to INVALID if it couldn't be claimed. I think that is
missing in the cec_config_log_addrs function.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
