Linux-Misc Digest #554, Volume #24 Mon, 22 May 00 01:13:02 EDT
Contents:
Re: Netscape spell checker in 472 (John Scudder)
Re: assigning IRQs? (Vladimir Florinski)
Re: Netscape 4.73 performance (John Scudder)
win4lin question (John Scudder)
Re: Best Intranet Server + platform ("Mike Purdie")
Printing problems ("ajohnno")
Re: Maximum number of files that can be opened in linux (Dances With Crows)
Re: Printing problems (Mark Bratcher)
Re: assigning IRQs? (Janet)
Re: serial mice & cheap motherboards ? (Scott Alfter)
Re: Compiling from source... Which compiler do I need? (David Bell)
Re: How to install Mandrake over existing Red Hat installation? ("David ..")
Re: Maximum number of files that can be opened in linux ("David ..")
Re: IBM Netvista ("David ..")
HELP: 8 Bit Linux ? (Dan Mathias)
Sendmail header lines (bluesky)
Re: clock skew problem (Reinhard Karcher)
How to split text file into two files that have ODD and EVEN pages. ("Robert
Wynkoop")
Re: G400 and xfs (Silviu Minut)
Re: HELP: 8 Bit Linux ? (Dances With Crows)
Re: serial mice & cheap motherboards ? ("Peter T. Breuer")
Re: Linux User Group in North Kent, England ("David ..")
Re: Dial up failure ("David ..")
Re: Need ideas for university funded project for linux (David Steuber)
arch ... ("Robert L.")
----------------------------------------------------------------------------
From: John Scudder <[EMAIL PROTECTED]>
Subject: Re: Netscape spell checker in 472
Date: Sun, 21 May 2000 22:22:11 -0500
David Kirkpatrick wrote:
> Hi John,
> ?? Not sure what your talking about with "won't see it when reading
> main".
I meant that the 'Spelling' icon only appears when you 'Compose' mail, not
when 'Reading' mail
There is no automatic spell checking as far as I know.
John
> On NT with NS 4.72 the Edit/Preferences/Mail &
> Newsgroups/Messages choice has a selection for Spell Checking. When you
> write a mail message with New or Repy it will get spell checked on Send,
> if you have the option selected. The spell checking is automaticly
> invoked when Send is clicked. Its nice as sometimes I would forget to
> spell check my outgoing mail.
> Possibly this feature is a Microsoft enhancement to 4.72.
> david
>
> John Scudder wrote:
>
> > David,
> >
> > I have a spell checker in 4.72. It shows up only in Compose mode.
> > You won't see it when reading mail.
> >
> > John
> >
> > > Hi,
> > > On Netscape with NT, 98 & etc. I have a spell checker. I
> > > thought I had on for Netscape on Linux but its not there. I do
> > > not mail much from Linux so possibly I had the spell checker
> > > before in 4.6 and the spell checker was not in the upgrade to
> > > 4.72. Composer does have the spell checker but I'm looking for
> > > the integration like in Netscape on NT. Is there a way to make
> > > Netscape have the spell checker integrated in to Messenger like
> > > on NT?
> > > David Kirkpatrick
> > >
> > > --
> > > [EMAIL PROTECTED]
>
> --
> [EMAIL PROTECTED]
------------------------------
From: Vladimir Florinski <[EMAIL PROTECTED]>
Subject: Re: assigning IRQs?
Date: Sun, 21 May 2000 19:01:23 -0700
Janet wrote:
>
> Hi,
>
> My video card and ethernet card are using the same IRQ (11, according to
> cat /proc/interrupts). At any rate, the network dies rather frequently,
> and the video has some issues as well, so I'm guessing that the shared IRQ
> is the problem. Is there any way to convince one of them to use a
> different IRQ? I looked in my BIOS, but the only IRQ options are to have
> them set automatically or to set them all manually.
>
> Janet
Use setpci to change interrupts for either card.
--
Vladimir
------------------------------
From: John Scudder <[EMAIL PROTECTED]>
Subject: Re: Netscape 4.73 performance
Date: Sun, 21 May 2000 22:25:57 -0500
Streamer,
Maybe that was it. I had no problem tonight.
> John Scudder wrote:
>
> > Is it my imagination or is the latest Netscape version 4.73 slower in
> > accessing sites than 4.72?
>
> I haven't found that to be the case.
>
> > My favorite site, freshmeat.net, takes
> > forever to come up. I don't remember it being this slow before.
>
> freshmeat.net is in the process of switching to a new server. I noticed
> that I couldn't access it at all yesterday. It seems to be back up
> today, however.
------------------------------
From: John Scudder <[EMAIL PROTECTED]>
Subject: win4lin question
Date: Sun, 21 May 2000 22:34:53 -0500
With win4lin, is there a way to open an application without the win98
desktop popping up first? In other words, just the application opens,
not the desktop and application. When I type:
'win c:/progra~1/micros~1/office/winword.exe' , the windows desktop
comes up and then winword appears. In the old win3.1 days, I could
type: 'win - c:\winword\winword.exe' and winword would load sans program
manager.
John
------------------------------
From: "Mike Purdie" <[EMAIL PROTECTED]>
Crossposted-To:
comp.infosystems.www.servers.unix,comp.unix.admin,comp.os.linux.advocacy,comp.sys.hp.hpux
Subject: Re: Best Intranet Server + platform
Date: Mon, 22 May 2000 14:28:55 +1200
There's another thread in this same group(comp.unix.admin) a little while
agon on this same topic. See if you can find it.
I'll repeat what I said in the last one:
Select your application after a thorough analysis of your business
requirements: reliability, servicability, support, cost etc. Then select
your O/S and hardware to suit.
I'd go with the recommendations made here too, although if you buy a Compaq
Alpha platform, consider getting their Unix (Tru64) too. Then download a
copy of Apache and your up and running.
I must admit to being biased towards Tru64, having worked on many different
Unix's , I still like it the best.
Cheers
Mike Purdie
Me, I'd agree with
Ferdinand V. Mendoza <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
>
>
> Benjamin wrote:
>
> > Hi !
> >
> > We are setting an Intranet coast to coast (Canada), I would like to know
> > what could be the best UNIX platform
>
> You came here so, Linux!
>
> > to work with and which webserver
> > will the best ???
>
> You came here so, Apache!
>
> >
> >
> > We want 1 main server, with 5 mirrors sites in major cities. They will
> > be connected with Frame Relay at 128 Kbps.
> >
> > Their will be about 1600 users for that intranet, and we want a server
> > that will hold Perl, Java (Servlet) and 20 users downloading the mp3
> > files (about 500 KB) at the same times.
> >
> > Thanks ...
> >
> > BenJ
>
> If you've got a fat budget an alpha can do that nicely.
>
> Ferdinand
>
>
------------------------------
From: "ajohnno" <[EMAIL PROTECTED]>
Subject: Printing problems
Date: Mon, 22 May 2000 10:29:59 +0800
Help! I'm new to the whole Linux thing and so far, I have enjoyed the
experience. However, I am having real difficulties with printing. I am using
Redhat 6.1 and have set up my HP 5p Laserjet using printtool. I can print
directly to port using printtool and I can also print postscript. I can also
print from netscape using the command lpr -plp1. however, I cannot print
from anwhere else. I have the feeling that I am missing something obvious
but I don't know what. Anyone got any suggestions?
Andrew
------------------------------
From: [EMAIL PROTECTED] (Dances With Crows)
Subject: Re: Maximum number of files that can be opened in linux
Date: 21 May 2000 23:14:48 EDT
Reply-To: [EMAIL PROTECTED]
On Sun, 21 May 2000 21:00:12 -0500, Jupiter
<<39289431$0$[EMAIL PROTECTED]>> shouted forth into the ether:
>What is the Maximun number of files that can be opened in Linux?
>Also, What is the Maximun number of files that can be contained inside a
>directory in Linux?
max. files open at once is by default 4096. This can be changed
dynamically; see /usr/src/linux/Documentation/proc.txt for details on
that. The maximum number of files inside a directory is limited mainly by
the number of inodes you have on the filesystem and/or disk space. My
/dev directory has 2065 files in it not counting subdirectories, and could
probably take 10x that many. Performance is not optimal when you're
trying to stuff huge numbers of files into one directory though.
--
Matt G / Dances With Crows \###| You have me mixed up with more
There is no Darkness in Eternity \##| creative ways of being stupid?
But only Light too dim for us to see \#| Beer is a vegetable. WinNT
(Unless, of course, you're working with NT)\| is the study of cool. --MegaHAL
------------------------------
From: Mark Bratcher <[EMAIL PROTECTED]>
Subject: Re: Printing problems
Date: Sun, 21 May 2000 23:13:51 -0400
ajohnno wrote:
>
> Help! I'm new to the whole Linux thing and so far, I have enjoyed the
> experience. However, I am having real difficulties with printing. I am using
> Redhat 6.1 and have set up my HP 5p Laserjet using printtool. I can print
> directly to port using printtool and I can also print postscript. I can also
> print from netscape using the command lpr -plp1. however, I cannot print
> from anwhere else. I have the feeling that I am missing something obvious
> but I don't know what. Anyone got any suggestions?
> Andrew
Where else are you trying to print from?
If it's your only printer, I would recommend aliasing the printer to the
default 'lp' name. Just add it using printtool, or editing /etc/printcap
directly as 'root'. You probably have 'lp1' set up now. You can keep
that if you like and call it "lp|lp1" which will use both names.
With 'lp', programs like 'lpr' will print to it without the extra
option. Perhaps some of the places you are trying to print from assume
the default (?).
--
Mark Bratcher
mailto:[EMAIL PROTECTED]
=========================================================
Escape from Microsoft's proprietary tentacles: use Linux!
------------------------------
From: Janet <[EMAIL PROTECTED]>
Subject: Re: assigning IRQs?
Date: 21 May 2000 20:21:59 -0700
Vladimir Florinski <[EMAIL PROTECTED]> writes:
> Janet wrote:
> >
> > Hi,
> >
> > My video card and ethernet card are using the same IRQ (11, according to
> > cat /proc/interrupts). At any rate, the network dies rather frequently,
> > and the video has some issues as well, so I'm guessing that the shared IRQ
> > is the problem. Is there any way to convince one of them to use a
> > different IRQ? I looked in my BIOS, but the only IRQ options are to have
> > them set automatically or to set them all manually.
> >
> > Janet
>
> Use setpci to change interrupts for either card.
> --
>
>
> Vladimir
OK, so I just want to make sure I understand setpci. lspci -v -n returns
00:09.0 Class 0200: 11ad:0002 (rev 20)
Subsystem: 2646:f002
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at e800
Memory at eb001000 (32-bit, non-prefetchable)
01:05.0 Class 0300: 10de:0101 (rev 10)
Subsystem: 107d:2822
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
Memory at e8000000 (32-bit, non-prefetchable)
Memory at e0000000 (32-bit, prefetchable)
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0
The first is the ethernet card, and the second is the video card. So, if
I wanted to change the IRQ of the video card to, say, 10, could I do
setpci -d 10de:0101 interrupt_line=0a
Would I need to change any other parameters? Oh, and do I need to do this
before the video drivers are loaded? Also, is it OK to pick any free IRQ?
(Sorry, I know nothing about hardware.)
Thanks,
Janet
------------------------------
From: [EMAIL PROTECTED] (Scott Alfter)
Subject: Re: serial mice & cheap motherboards ?
Date: Mon, 22 May 2000 03:38:41 GMT
In article <[EMAIL PROTECTED]>,
Mike Keiser <[EMAIL PROTECTED]> wrote:
>[EMAIL PROTECTED] (fred smith) wrote:
>>Is it an AT-format board? One of those boards where you need
>>to use a bracket with cable attached to hook up the serial
>>port connector (attached to the bracket) to a pin-block on
>>the motherboard? I've had untold grief with those things,
>
>yep - it's an AT board, although I don't recall having to worry
>about a bracket-connection like that.
There are two different ways that the serial cables can be wired; different
manufacturers tend to use one or the other. IIRC, one specification calls
for the pins to be wired in numeric order (1->1, 2->2, etc.) and the other
uses some different orde that I don't recall. Among the motherboards I've
used, FIC uses one scheme while nearly everybody else (Biostar, Supermicro,
Asus, Abit, and some no-names) uses the other scheme.
_/_
/ v \
(IIGS( Scott Alfter (salfter at (yo no quiero spam) delphi dot com)
\_^_/ http://salfter.dyndns.org
------------------------------
From: [EMAIL PROTECTED] (David Bell)
Subject: Re: Compiling from source... Which compiler do I need?
Date: 22 May 2000 03:46:46 GMT
Well, it seems I have another error when compiling WINE. Here it is:
make[2]: lex: Command not found
make[2]: *** [lex.yy.c] Error 127
make[2]: Leaving directory `/home/david/wine/wine/wine-20000430/tools/wrc'
make[1]: *** [../../tools/wrc/wrc] Error 2
make[1]: Leaving directory `/home/david/wine/wine/wine-20000430/dlls/display'
make: *** [dlls/display/display.o] Error 2
--
If anyone knows what this means, any help would be appreceated. Thanks!!
=========================
David Bell - Otherwise known as DB7654321
Remember to remove nospam, notrash or anything odd looking from my email
address. :)
------------------------------
From: "David .." <[EMAIL PROTECTED]>
Subject: Re: How to install Mandrake over existing Red Hat installation?
Date: Sun, 21 May 2000 22:37:40 -0500
Start from a power off boot, Insert installation boot disk and turn
power on.
--
Registered with the Linux Counter. http://counter.li.org
ID # 123538
------------------------------
From: "David .." <[EMAIL PROTECTED]>
Subject: Re: Maximum number of files that can be opened in linux
Date: Sun, 21 May 2000 22:53:01 -0500
Jupiter wrote:
>
> What is the Maximun number of files that can be opened in Linux?
> Also, What is the Maximun number of files that can be contained inside a
> directory in Linux?
>
> Thanks in Advance
>
> Lee
Physical memory divided by 4 = sum
sum multiplied by 256 = max files
This may be a little conservative but should be safe
You should make the max inode about 3 to 4 times the max files.
Example: My system has 256 Megs of Physical RAM so it would be:
256/4=64
64*256=16384 max-files
16384*4=65536 max-inodes
--
Registered with the Linux Counter. http://counter.li.org
ID # 123538
------------------------------
From: "David .." <[EMAIL PROTECTED]>
Subject: Re: IBM Netvista
Date: Sun, 21 May 2000 22:55:17 -0500
jhecker wrote:
>
> Has anyone tried setting up one of these puppies with a Linux distro?
> Perhaps bootable off a server with minimum (swap only) disk?
>
> TIA -
>
> Regards,
> jh
You might check IBM's website. They did port linux to the 390 mainframe.
--
Registered with the Linux Counter. http://counter.li.org
ID # 123538
------------------------------
From: Dan Mathias <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Subject: HELP: 8 Bit Linux ?
Date: Mon, 22 May 2000 00:14:22 -0700
Hello,
Is there any 8 Bit Linux or Unix for the 68HC11 or 8088 cpu ?
Thanks
--
Dan
------------------------------
Subject: Sendmail header lines
From: bluesky <[EMAIL PROTECTED]>
Date: Sun, 21 May 2000 21:16:51 -0700
I am trying to pickup the name of the original recipient name of
an aliased email delivery to a common user on the localhost. It
appears that the header is the only source for this info.
Sendmail writes the original recipient in the 'Received:' header
line in the form of 'for <[EMAIL PROTECTED]>'. However, if the
list of recipients is greater than one then sendmail does not
write out this info in that header line. I need to configure
sendmail to include this info under both circumstances.
I have that 1000 page book on sendmail and have been trying to
get into the guts of it but I need some help. Are there any
sendmail gods that can help me out?
Thanks
Paul
* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!
------------------------------
Date: Sat, 20 May 2000 21:49:59 +0200
From: Reinhard Karcher <[EMAIL PROTECTED]>
Subject: Re: clock skew problem
Bill Unruh <[EMAIL PROTECTED]> wrote:
>In <[EMAIL PROTECTED]> Jinning He
><[EMAIL PROTECTED]> writes:
>]I have my redhat linux 6.1 coexisting with winNT. The clock is ok with NT
>]but in linux, it's always slow, about 6 minutes slow every hour. Each time
>]I reboot the machine, the time will be adjusted to the correct time but
>]then after a couple of days, it will be several hours behind. I have to
>]use 'date' command to manually adjust it when I have clock skew sensitive
>]applications. Is there a way to fix the clock permanently ?
>No idea of why, but get and install chrony, and ntp daemon which will
>keep your system in sync with atomic clocks (assuming you are connected
>to the net)
Try to remove /etc/adjtime.
Reinhard
------------------------------
From: "Robert Wynkoop" <[EMAIL PROTECTED]>
Subject: How to split text file into two files that have ODD and EVEN pages.
Date: Mon, 22 May 2000 04:20:30 GMT
I would like to print a file on both sides of a piece of paper, but
don't have a duplex printer. How can I use my Redhat 6.2 config
to print the ODD pages, then feed the pages back in and print the
EVEN pages?
I've looked at and tried csplit, but could not get it working.
Some of my options appear to be:
1. Use csplit to get a single file for each page.
Then write some script that could
output the pages based on the file name csplit
assigned it. ( xx00 = page 1, xx01 = page 2...)
Problem: I'm not very good at bash or peral, or whatever yet. Any
examples?
2. Build a C++ or Java program that could take
InputFile, Odd_TargetFile, Even_TargetFile as parms.
Note: Yeah, I know - if I can do this why can't I do a simple script.
Thanks in advance for any help.
Robert Wyhnkoop
[EMAIL PROTECTED]
------------------------------
From: Silviu Minut <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.hardware,comp.os.linux.setup,alt.os.linux
Subject: Re: G400 and xfs
Date: Mon, 22 May 2000 00:38:30 -0400
Sandhitsu R Das wrote:
> I installed Xfree 4.0 and the mga driver loads fine. But X doesn't start
> up - says "couldn't find default font 'fixed'....any workarounds ? I tried
> specifying FontPath explicitly by directory names in XF86config - doesn't
> work. When I use "unix/:-1" it says - "deleting unix... from fontpath".
That's because you probably don't have it. If you do have it, you need to
specify the absolute path name, like so:
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
Look in /usr/X11R6/lib/X11/fonts and see what you actually have.
------------------------------
From: [EMAIL PROTECTED] (Dances With Crows)
Subject: Re: HELP: 8 Bit Linux ?
Date: 22 May 2000 00:44:03 EDT
Reply-To: [EMAIL PROTECTED]
On Mon, 22 May 2000 00:14:22 -0700, Dan Mathias
<<[EMAIL PROTECTED]>> shouted forth into the ether:
>Is there any 8 Bit Linux or Unix for the 68HC11 or 8088 cpu ?
Linux requires a 386 or higher on the PC architecture. You might have a
look at Minix, some versions of which can run on an 8088 IIRC. The ELKS
project may also be of some assistance. However, the best uses for
non-embedded-system 8088s at the moment are probably landfill material,
dumb text terminals, or possibly old versions of DOS and WordStar
1.0. Technology has a lifespan, and the 8088 is just about at the end of
its life wrt non-embedded systems....
--
Matt G / Dances With Crows \###| You have me mixed up with more
There is no Darkness in Eternity \##| creative ways of being stupid?
But only Light too dim for us to see \#| Beer is a vegetable. WinNT
(Unless, of course, you're working with NT)\| is the study of cool. --MegaHAL
------------------------------
From: "Peter T. Breuer" <[EMAIL PROTECTED]>
Subject: Re: serial mice & cheap motherboards ?
Date: 22 May 2000 04:41:36 GMT
Scott Alfter <[EMAIL PROTECTED]> wrote:
: In article <[EMAIL PROTECTED]>,
: Mike Keiser <[EMAIL PROTECTED]> wrote:
:>[EMAIL PROTECTED] (fred smith) wrote:
:>>Is it an AT-format board? One of those boards where you need
:>>to use a bracket with cable attached to hook up the serial
:>>port connector (attached to the bracket) to a pin-block on
:>>the motherboard? I've had untold grief with those things,
:>
:>yep - it's an AT board, although I don't recall having to worry
:>about a bracket-connection like that.
: There are two different ways that the serial cables can be wired; different
: manufacturers tend to use one or the other. IIRC, one specification calls
: for the pins to be wired in numeric order (1->1, 2->2, etc.) and the other
: uses some different orde that I don't recall. Among the motherboards I've
I've actually resoldered them once (I'm quite proud of this: the
information that the two modes existed was enough to deduce the
pattern). The two modes in usual mode are 1234... up one side
and down the other, and 135 ... 246.. ("lace" mode).
: used, FIC uses one scheme while nearly everybody else (Biostar, Supermicro,
: Asus, Abit, and some no-names) uses the other scheme.
Sort of.
Peter
------------------------------
From: "David .." <[EMAIL PROTECTED]>
Subject: Re: Linux User Group in North Kent, England
Date: Sun, 21 May 2000 23:41:06 -0500
Ian Wilkinson wrote:
>
> I would like to know if there is a Linux User Group in or near the North Kent
> Area.
You might do a search at:
http://google.com/linux
They have many listed.
--
Registered with the Linux Counter. http://counter.li.org
ID # 123538
------------------------------
From: "David .." <[EMAIL PROTECTED]>
Subject: Re: Dial up failure
Date: Sun, 21 May 2000 23:44:45 -0500
Mark Bratcher wrote:
>
[snip]
> How did you configure the DNS? It's not part of the Gnome dialer setup,
> so how did you do it?
It is if you use rp3. You can set the DNS IP's with rp3.
--
Registered with the Linux Counter. http://counter.li.org
ID # 123538
------------------------------
Crossposted-To:
comp.os.linux,comp.os.linux.development,comp.os.linux.development.apps,comp.os.linux.development.system,comp.os.linux.setup,comp.os.linux.advocacy
Subject: Re: Need ideas for university funded project for linux
From: David Steuber <[EMAIL PROTECTED]>
Date: Mon, 22 May 2000 05:00:02 GMT
[EMAIL PROTECTED] (David T. Blake) writes:
' David Steuber <[EMAIL PROTECTED]> wrote:
'
' > What TrollTech is currently doing with Qt 2.x and higher is a
' > good thing. People who produce GPL software can use Qt without
' > worrying about the QPL.
'
' That is not even close to true. Trolltech has rights to a copy
' of everything that even links with QT. They could EASILY take
' your QT linked code, and fold it into proprietary software.
http://www.trolltech.com/products/download/freelicense/
Show me where in this license TrollTech can take GPL code that links
to Qt and make it proprietary.
' From the QT Free license.
'
' If your program links with QT or is a modification of QT, you
' must supply a copy of your program (including source) to
' Trolltech.
This wording does not exist _anywhere_ in the QPL.
' Think about that for a while. They are granted a copy, with
' full rights to the copy. They are not bound in this copy by
' any license you use. Fair use would allow them to use large
' chunks of it in proprietary closed software.
Fair use is not well defined. What sort of code can they take from
you that wouldn't normaly be considered fair use?
' A license is not free if your modifications of the copyright are
' not as free as the original.
Modifications of the copyright? I don't understand. How, for
example, would GPL'd code be made less free? GPL is a very
restrictive license. Once code is covered by GPL, it can not be
uncovered.
Are you telling me that TrollTech owns copyright of your software
simply because you #include some qt files? I think you are wrong.
--
David Steuber | Hi! My name is David Steuber, and I am
NRA Member | a hoploholic.
All bits are significant. Some bits are more significant than others.
-- Charles Babbage Orwell
------------------------------
From: "Robert L." <[EMAIL PROTECTED]>
Subject: arch ...
Date: Mon, 22 May 2000 05:07:39 GMT
after installing a kernel source, there's some directory i think i can
remove.
I'm on a i386 ( i686 ) and i don't think i need any other ( mips, sparc,
alpha, etc... ).
Can i simply erase those directory in the arch directory?
Thanks.
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.misc) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Misc Digest
******************************
