Linux-Networking Digest #322, Volume #12 Sun, 22 Aug 99 09:13:48 EDT
Contents:
network failed, and "ifconfig","demsg" gave me this info ("Andrew T. Yang")
stale NFS file handle ("u2161474")
Squid and Masquerading ("tobiX")
Re: NE2000 PCI installation problems... (Tim Moore)
Re: @Home with Muliple IP addresses and Linux ("Suddn")
Re: My server is refusing telnet sessions! ("Van Wambeke")
Problem with Nics ("Robert Rodent")
Re: Synchronizing cmos clock with timeserver? ("Steve Cowles")
Counting traffic on multiple ip adresses ? (Emmanuel CHILAUD)
----------------------------------------------------------------------------
From: "Andrew T. Yang" <[EMAIL PROTECTED]>
Subject: network failed, and "ifconfig","demsg" gave me this info
Date: Sun, 22 Aug 1999 00:33:04 -0700
Hi,
I tried hard to make my network work. But I can't. :(
1. When I try "ifconfig eth0" command, it gave me this:.
************************************************
Link encap: Ethernet HWaddr 00:80:AD:41:FB:c5
UNspec addr: 171.66.102.47..(those addres are correct)
BROCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 frame:0
Collisions:0 txqeeuel en:100
Interrupt:11 Base address:0xe400
************************************************
2. And, the message of "demsg" command regarding the networking part is as
follows:
************************************************
eth0: ASIX AX88140 at 0xe400, 80 ad 41 fb c5, IRQ 11
eth0: EEPROM default media type Autosense
eth0: Index #0-Media MII (#11) described by a 21140 MII PHY(1) block
eth0: MII transceiver found at MDIO address 1, config 1000 status 782d
eth0: Adversting 01e1 on PHY 1, previously adversting 05e1
**************************************************
Hope this info is relevant and useful for you to analyze my problem.
It seems The kernel does recognize my card (right?). Network works perfectly
fine if I boot with other OS on the same machine. I am frustrated and
desperate.
Thanks you so much. You're a life saver :)
------------------------------
From: "u2161474" <[EMAIL PROTECTED]>
Crossposted-To:
aus.computers.linux,comp.os.linux,comp.os.linux.hardware,comp.realtime,linux.debian.user
Subject: stale NFS file handle
Date: Sun, 22 Aug 1999 16:24:47 +1000
hi ...
I have a server and 2 workstations (clients). The server only moves files
from workstation1 to workstation2 and vice versa. However, i really get a
slow respond that my program only works if the time interval of data
exchange no less than 3 seconds.
Otherwise, i get this error message " cp: cannot create regular file: stale
NFS file handle"!
please help .... here, i have the communication diagram between server,
workstation and A/D card for reference.
begin 666 clip_image002.gif
M1TE&.#=AO $J`7<``"'^&E-O9G1W87)E.B!-:6-R;W-O9G0@3V9F:6-E`"P`
M````O $J`88````1$1$``#,``&8``)D``,P``/\`,P``,S,`,V8`,YD`,_\S
M```S`#,S`&8S,P`S,S,B(B(S,V8S,YDS,_\S9C,S9F8S9IDS9O]$1$15555F
M,S-F,V9F,YEF,_]F9C-F9F9W=W=F9IEF9LQF9O]FF69FF9EFF?^9,YF99F:9
M9IF99LR99O^9F6:9F9F(B(B9F<R9F?^9S)F9S,R9S/^JJJJ[N[O,F9G,F<S,
MS)G,S,S=W=W,S/_,_\S,____S,S_S/___\SN[N[___\!`@,!`@,!`@,!`@,!
M`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!
M`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!
M`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!
M`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,!`@,'_X!#@H.$A8:'B(F*
MBXR-CH^0D9*3E$-"@I>6F)6<G9Z?H*&BHZ2EIJ>HJ8P0+R&NK[ A$:JTM;:W
MN+FZN[R?&D,`P<+#&K^]Q\C)RLO,S:>_`0`1T]3!Q<[8V=K;W-VEO\$Z.^+B
M&@#7WNGJZ^SMR- 1$! 1PO3H[OCY^OO\B^ U.FR\$!;BG+%^"!,J7-@,&@A7
MYJP9'!*PA@V+&"]JS,AQHT8;#$.*'"D27(9B*#5 F*B!W+B7+F/"G$DN`\F;
M.'.N@^9"B(9I&5P4O&;,A=&C2),J17KIH,ZG4*/R`@>B58A6*UD*&L:UJ]=@
M(78,<2JUK-FSHJ!]U0KLG*9+</_?RKWT8I8@LFCSZMWKK^U7HEO=2GH18!!>
MOH@3YU7+]21;:Y/J&E9,N;)9JDI!/ 8`(K+=L99#B[X)[L6.TZA=;#[,2/+=
MT;!C(X0VCUJ\:8#;=A[\F;7LW\"U_<J@H_BXXN5^&8/,>W+PY]"Q:=AAU%4-
MZ]:5!_:MR#7HZ.##]](`PC& &L'0;]X=R3MW\?!%UYB?B1;Y#)K/I[>FW>^\
MVK7=-@V \0306WP(QF8#"/0$`X$M]^6GGGJY!0,"".1=F"&&%W;(X84A.'>+
M#B[4T%."*&JC'E<:U(=*A/OIQ]8.+E;R'BD[- A `"Z(E>*/RJCFE0[VE1?1
MA/R-M6/_- $TZ>23`!"I2 8&XN)584!FV8N074F9"HPR4OA+#:VTLI:%+Y29
M)F$`7.6*"[=$U)66=.;")5<@%8E?C&+"B4B.:ZYY%6$A(F/#5W4FJHH062WI
MY NI"$'F"X=J$$*3-C190Y.=L?*"E$*$&JI-B+0H:HVX1--5!%XJZNHG0F0J
M#*2V7&<#C2Z\(,1IN])(XZY"9+"K"Q=&`$L$'B8;``2O0-!J+CK($I2J`-#Z
MZK64;%J/C[:0:.)U(90H[K=&F:A!B?.A.]^ZW[;++KJH\A*L,!EPB^V]BPA1
M4##(QOLJFP[:B^_ @^0H#'L$"Z(#!*H&4$/"!._ <# .8\.#_PU2!F2##:%N
MS#%%/ CRDL=$>BRP-@L?["_$6N[KX,J]V- 2#"J,Y:P.0JA6' 0\5"6(""+H
M+(X0`+B@@P3/:B-$?@! <#++0/HDC-/:P- `"#X(`@($)OZ WA ^!* ##@_R
MX*QJ\^$,`$BL@))C!A:=(FLPUD(-Y*'"^+F-#B)</58&/OS@`WHJ."N(!.8.
MX4(`@@O.F01Z^U(/UWF*PJ@P+=J=XMS2)#U*=0&0*@D.,BC^( @;#/*UV43J
MT, #(7^-"0`Y# %Y*'ASM6R)H@Q$<>6:B\>T8*,(D68&.P[SM",XF("#("Z8
MD.8XA<(@)0@F*'R5"3<,`4+(.CP<"O^U747^B0[4%AI\= 8S-XKO7PE+D@Y>
ML6J*G%2O#URTPP`_B@XZ&H;8<#*\8)S(%(NC6%CT%YL[R0\5].N*Z.;7L&'4
M;102&X;Y&)B8>04#;JI(H.Y@IA!ZU*LN4UO>)US0J,QQ$#$[F%L`U'<*%R#/
M03;(R@5)L@,:BG""I;@4O_SW0K-HBU^>&\7PU"<+%4*".AD("B?T-:(,&"X5
M,MQA$9^BKWJ @(2@R$\(GN7$1Z!O&!G08B,TLT&$2.V#9=PB0]K7)C"*0ARG
M"* PDJ@(O 4@COD`6,7DB).%-4Q\""G!7R)!QP>-!( '(R1)`-8T.Z[C3AJ,
MA)SH=A.F10#_D))<QQN;!LIVK(A>D3CE'F]RQ**%LA_&HY8:$^(".5ER$#I@
M0/UBMB,B6JY1`9CE*[N1NQWQ,1201!@N<B<)"ZR%AKB0TXTZ`3\`/'"8ZO!D
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MBB:=EBVL$!?:T3&Z`[*%E6P[;! "P7*36A\-+2$XQU14*-0=G'6$9]VAUVE.
M4:'UE&TAM*E92'!NK-U ;6=5RP[0%K5AATTJ2V5:7$BP4YW:R&TC=HL/SEW4
M$T-%;EP3ZUK+A:"%U46&<G7+W'8DE%[?G6)#96M2O\H5F/'=AG8;\0((@'4?
ME+1O3AO6H[_N0$[!'3#%"KR/]9I%!R]%Q?]<MTK3`^M(O*&H:L 0LM\'Z^B_
M043O0VF+W4]<6"$.1HN&K1E680P0FY[\F'UV5-Y\=!@MVE*F*;)*D%?.5<>+
M"DF*]Y)>LP(7I?>:ZWD2=&-LG3*Z!&MLD14S9'S1T;?WPNR4*=-D16RY,LZ%
MVM+2%T(00#DA54[$Y3Y9EE"A(I]0X]R+&2H,)-L8KRMM+P$-B(JWYA=!+O*J
M-&KPY43PN)]023,B]%KBA2@4Q*08[4@551>Q3%=E+?Z=5+I\".Y"Q:AGG@2$
M#UD(.X=F!PL&:&QA=5[,%7H=BNZTGG-2`ZW^F1+AS81WXG,YW0FX%.^UZ%DX
M;0A/1^6MIMYNC"/_<NO1N&P8KT:$21D,E:T5:'+QB&PX\L+.4$^BE:A$T%<:
MO5*GDGLA=.Q*LXV-V ^G`M5=\;9E"C@,#'>B4?;&"2;#;4;XG9LD^/OW(Y3L
M3?$4$XVN.$5!%'N63>)YN8V)=G?S5@I5"E#>BHE&!*PRL'0O&1(*'8; 1=+#
M57="7R\(.5V%&Y5B8AEZ7\%X?"",PI&S7!_YP9(FAW3SGF-C7C7V,OE")W&?
M0Z66)D\,:RNQ`W85W>@Z&:7-H9Z,<3Q=?SXY,=7=<48V]_S0O=PZ/H;:[&&"
M^NIB7U0+DQT\VTS#U6GG1T1KP':($5P808_[.L#>SHV]T^%6U;M"9*$[_\?*
M4:]=$OQ"`+^V4.Y[IUJJC^2+#1_&OWPOGBJGYC?/>4$%*@2L:665@F.#-*8I
M!29 O>I3SWH7J#YZ*2CGH&0/9-@LTA"U[+SN=Z_YS+;C\I3@C@UX!YWAOSO?
ME7FVIG$O<T@LD!W&6"MYBH&AZ5N_^MBGOO8QI#?@_\;XQ)J^ACXD_O)SR/SD
ML73M1Y,SK1Y5VGE"2?:OKWWZVQ^LD/:&,91_IOX30T0_8GSTYG\$2"0]!!Z2
M0FB*X (@@7@$^( ^\GP[(0C[<E0;8Q$7Z#$8^!$<:!'NXWVR87P1`0$96((W
M, ,GF((HN((I*"2%LC1UPH"6,"LEV($:>(,9&/\1/I)_W;!_#O()'Z@E`OA!
M0+AR!T@G,N@7S3<(^Q*!=9<+/M@T17@0(*@@<)(?53@(9_6"ZX<@,LANDM"$
M%/B$T42!/^@)09@E(DB$)V<A(H-\X?&%@=<)8C@[email protected]>A(G9"&=W.%\I1G
M;8()71@?<HA6GE"'=Y@.>3B%`+@Y?LAB;6B$< @>\Q$8C4>'P;"#:'<_9BB%
M:$@\63@::UA9@+@;,(B$#3B'G("(9!@GG:B'G,"'`?B(0.16B':$6E*(E[B*
MF3B&O_>*C/@::OB(H3B#*W>*N9B*AHB)`."$OVB'9[B'H"B$<!(1M2A5DAB#
M>:**E5"'/,@-B_B)5$C_C=[SA[88B)8PB/"ABTO8B<X(?9WX2>) $_0H$_,H
MBXY8CJ14CS/Q$OY(#A&T&[B8);K8(__(C_9X&OFAB<_(?P]X)N,XC$KRD _(
MA=IHC!1)@.\X@= 8`5;TD1 `DB(9DB0YDE9D+<48&D/HD279DB;IDBU)*P,)
M))78%C#YDCC9DIGPC=M@#+'R9;'B)2EI&<9G=: 0*Q^#C 29)QB#3)63B/I7
M"CJ@`2A)CMRD`7 UDS^2A$KT0%#9#7 S+NXRENKB+NHBEN(RE)6Q(.2R+F7Y
MEN_BENG2+D:ACN(A%.@"EW*YEW/9EW-9(@G6#;W2*[X20\5"?1VR(0QR(:9!
M_YBHX69:@AJ%>1H+`@(!D)@>DB$10!X&R2N2F2BA\IB2J2\8@BSCAYDJ01[S
MZ)FH@1"N\'F=YR9J<EX04Q6SJ7FSIR9K<HWWPBBRIWNON28^@Q Z8'KD(PVP
M*9MIDINZ^0)J*1HR<Q5#MW&W"9N>)YL)]RI4"7K':9NWR9S->16_Q@X1E#Q-
M0C$9V15V"1\'=Y[HN1;'V163&!\J5T'IR16;F K%>53T0R1;E2EP`GI#D"D4
MB"45<R&-J(89P"J'TA0`<!<@@:#%J3 V(00#=!V">"U8V1GXD3-8DE"6,$"Y
M0A$;9SJ6X)6MJ M3B2R9$@$&<IEP4GI#D% VD2-W\?\PA_(P:_4==2(S+/HD
MFZFCT?<+-CH$&9 G1ZHX7[2>"((?K*(!+QHZ#Q(L1#(051HB"W.B4^HT7ZD.
M!\9Y&'(\NWD\5Q&F+\"8*=<*BK(@8&J;II>F<,J8(2"GEE)VX6&;X&EZY)$F
M=0IZ8OJGEA*8BC>HA%JHAAI#38E+.A R"O-"B-HJQ1$RL<*H1>0Q+I*HQ5$6
ML@!A$@`].$ B/$ B#\I!*L$WG>$#*H #-J ".J ",_ ![5@G1&,TAC,#K(H#
M,# #1B$!^=D,Y3$$,/ `BM.IN*0:+W0-+C +M50(9I-T!$,T1 (!+@`$5R0(
M0" "3)H0(" `+> "(5,XA7#_*,<*`=T:,AA""#[ `3531$3S$# P@\]2`X:7
M$UM#"$?S`XI#)# PJ@RD`<0J"#S `2'C`CA0`>O*KGLU"")0,]11'# ``4#0
M<ALD%#,0L4&0K=B2`^83!$)1'"I@`BWPKD4$`@)#<SS `RYP`UECJ"S;LB[[
MLC ;LQ(VIUWJ"(DJLSB;" ['DXJ :K"8LY31=,5@`SV05W::#197+3YU0T<+
MM#?!.0#0`'F7")HQM>G@D,Y*"-?EM(JA1\$0L9$@)!'0JZK@D,U6GOSB*DLC
M#PJ(:SR;*%^!L3M +<\I+\?93H75*#U6)X3G8B-G,$T+'PY(<9WE<%F[-YXT
M40ZY_XM <D9<X760P#13!Q_59(Z+L&\!0+:JT""'.Z#P22<'AW>IA$::2QG]
M1;AF%)^0R \-TFPU\!!]:RS6(83U<VX>A[$IHAXZIULJ9T']T+HV8KE `GA6
M2PB]R[C8(B2[NUVNT ),\Q#FQ+JD)0D14;>BT6NUY0B/!WGWHKR54)XIB@R<
M&[RD6"=8& F&-'1-,I\HXKVX5F<E-+T[5[YTDA^\V0BZRS+N2U'PFQ# &WS"
MFR41\:^2L+]11C'?V[\(\;^34+W7DA\?4 D&/# 3_$0*W _RZD(-',! DA\$
M'+8(##%X<[^,`+Z*X<"O`L$2',)VAS-,=\%[@<*N,L KO/\C7&7"B2'#BB(D
M+5##R^M/\-:,)\S!49-L%?Q..(P8.DQ(1XQ-01R^_+#$<M3$PY3$?"'%6T3%
M/@;#^]!#@8O%1:3%H63%_* J30O&+R3&KG*F4_?$\:NT`$R_8<S"!QP,"=R+
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M'EL#DB09DB1\"!>M#C_U%>Q;>@`--2L='8[K%?,L,@[M#4GK>X^@?-4ZQ?FL
M)96+.>@+/U"\"P6$MX\0NA\-'P_[``* U0_@HBZ*L3L-'GI+,><4Q!2CP?G0
M:YVL"*J[RHCQ`6N!S^V,+T.UC(\0UGS&#[DCJ#KK%6S-%V;C%9T[D<@+RY%D
M75_QL_FP_W C1V^Q"ALYT!67U[L3G2 W],,EK+J!RPS!$MB#\ +DU-BR(0!<
M(0EQ&S'T,'(.&#I<>PIHZVV#ZX8$@Z&XAA2KG0H2/0GQF;VU+;/30 F(+$!/
MO=NA%1"<D ,F(]S(G=S*O=S,W=S._=S0'=W2/=TCX9NXZ7G+N28EH +;W=W<
M_=W>'=[@/=[>#0%]+1*OD-TM( +KW=[L_=[N'=_P/=_R7=_P71"3JQ=KE=W5
M.7OB_=_D'> `[MT@P-E39(JBH@F$X&:0>0H<4 $*+AL+%!<1'N'Y230-&!TU
M:0EP$6A#`+:J`&$4OBB=42;DQ$(4>!6YDBN(S0C<)S,:,!_W,/\(%6 4_?4;
M"R2M:T(L5Q@HN5+@DI!M:?0@&8 TS*KCV1D<E9A&*^[9,6ZD3=X*N,L*#Q*2
M._ 01(U+07&F!FY6)?XL^R<PA^&8G^D])C)\%R'CAL !0] #0!#3B;% 9 %A
MWE,CQF<(DIGG6J,=O_ !7"D(%[LKT0(=E8@7,H@7M9?GK0D:RA$6(: O`C-\
M/=!T75Y8)4YW\SBA0_ "F/X2U\@U[#(?X6+F#%CJPX<7O\ !+E Z$BX6]>(2
M1N$],A'KA?"ZH3X?4PH8RO'G0] S?@X0A/XPTS$3E#($%0"0AGD(K7#K+<'H
M8^'H5UXC$ 8!.$!M?=893<<N?D<1I(/_`^OB.8<A@&=>EG@!X9-]%@L$`SF@
M[C P'V(1/NKN=(:PX81@#.>J'9#S+$MS[GM1B20B`]U>`S(0L6,#\#+@[LJ>
M-'+.Z-">B*=^"S!X'9^W&Z_[`B4@G(<0[M4X[FB^K(7 YA .' M4%>W="N_J
M>JR7)F8V[Z[U"S[!YT/@Y_YSL>?-2@^3)N,-`D02`MYM\6WT*88`]'S>\"7K
MG!#_Y85@#"4@YAE_". 7`ACS$%&_0ZD>' MOKU=H"'=."/3N' A:ID. K<_2
M,S5/$H6.>Z5#%D `9$!?"".OIA<B*:!GYQY?"S"8)J%.*BI0EC5PC1JO23S:
MZD8:ZJ->X(0O_UA=+XR/$ 0B4/8C4>BAC@,KSP$&3SK$DO!!_V\0YO@92N9V
MI3!Y'B]_O\>!'QL+I.@NS%**CBJ)7_J,L#2<+V0/0^8]`"HR$2]M3P@UBP@/
M;PM:F0AGVISR,RC$WPK_UA\X7DJL0-Z=$2W\[2:,)*"4.,]42=YL/J#%OYPD
MM?E'3P@&&][$(0@RH +)^6K(+_@*\P'T?1#D?_$[7NEX+OT:7E"ON]UEHH<N
MX/YIX@+<S4UUWU6 `#(T.,1!2/BR<[C(V.CX.*01"4E9:7F)F:FY&*(XJ./"
M:+%)2B@$(EFJNLK:VEA3<^B"LYCJ>JGS8GM+>7JX.ZBB\_A2_.)B8_\<,E3S
M$N*\\PPM_1)+* G,J[W=VDF8R[CQJ%.B4J[3(I*>XZ*N#N.2WO*BX][B.12=
MS<W?3PHK2T8M2-0Z4;/AXED(9-(,%@LQC!#"??Y\76-4(F(C6QI "!GDT2/(
M&J&&3+QXD:*_E2P)>?OT@I%*'-9DP."X2P-'%Q%YFD+5,JC05]8&U:#UZU$/
M08.J+<L7@N/+$,U@'LJEDI_%0=E4X)-Y#82GD!^'@"!IM ;'I%F'NNV&#]Q
M1S)*PKB!\Q!0KL@&]1VD[ZU@E@`)N1"8U!$0ID.<`HYZ;6K5(7('G1P:+?&A
MC(\T& /AK%@&(0I?9+#A^<79#)_9#GY]ZR7_Y9AS&^D`W0+$# C*0#L+$<*W
MZ1H@TFG0>*HM[.69"AM%BK*1D HJBFFPP3IT:ET)K:-^80)$29C*M6V-I".]
M>A :@V)C#G^3;!T0U:<?A1ER_/V;G ]QP9-]&;QUF5#GZ6!#@@K:4(I]-CBH
MWH,(ZN#)>_Q=^(AL0L"0PX(WM(>)$.E).&*$)2+X6'D87NB?$#+@(,."#4I(
MXX0D2E@65FX)<=V"";ZHPXL^#DED@A&X$!J2H#V3`7 )(@/!@Q!,LF*5+B%3
MY((ZW###EEURB4.1(319#8 0/.-"#1E$"0IQ+]A0@WY6SDE(G%G>B>=$+F@`
M(#T0\%E#E%$BI$N"_\>HR N)]IVX:*..IA<`:"! T*2DE )73)09I'?:E'2N
M*.*CHHYJWPL```?"F&<&-V8&:DG*DYH#?DIGJ*3>ZJA:?T8EJ :\VG#FGL"E
MYP((L]):R0[*4K@#A<PNVVRT@%&(;+6L"!%MMLY"JVRSA"AK;;BN,$LNM]$Z
M6Q9EZ8K+;KONO@MOO/+.2V^]]KJ[PYN5")$()M !]H(0<#(RL"/]'H*#3Y2
M<N\C2*[K"$*8_,##(@`=? C&BU0V" \NW.!#)0HW3$DQEOBW,!"+(,,OQ"U'
M/-XGLT#<B,:.B "!IY#L``"(C_ `H@X`"(&6Q:& P. B`!3%`WO_50R)"_\!
MD,R(#SG#4$D(.E<R`\0Z#0$1(_4Q9MC4AJDPA,>5!$ ;U8[P`($`/C/"`:(S
M,'(F:5\-<0H0,Y ]B-:'J("U#G=3LG0O$.@@`2T06*""!#_X4 \$./C0\V(B
M@%!Q.QP<< @,Z<(@WM"3#D&Z"*:?!H D,^",=>)-D<W#WY*[```/0K0#@@!N
M#PX"#.((#0,'(J1=K 1F34DZ!Z$TC7O,*Y@B@@L2?#!$XB"H\&?V-D@`@ T>
MXPR$U*8L?@@/)A@_1 2<GP)#`S'_KE<UAM0```P2W("\!(94( G/A4(''(!!
M^ C!`^CX('@1Z$3/3K&"`PBC9Q!@@ X\!@)#G.[_$P@(`B'\]@()A (`(A!"
MTPQ8%$>HP ) 6-\0(""(`XI !S#\0<]<$($7JL"&.C"!SG;P+PA,D#13DI_0
M3C$@`(1"&!80A^R&D +E$>(',[PA``9Q0P;0;PA L)S58,"SI4RIAP;\@>",
M*( ><"][XXD9#JX(`N4I\8U#L( D``"C*ZI/: @Q&]_D)@O2/>"%)1C"&B-0
MR"VFKP$Z$(+<;'#%#R@/'KB+A"0:4 ,9-* 0,4S:?]+E@DV>B6>@R.&9>M S
M'U+&! :,ALYTP "H^64&'$CBT9R8PJH)$4 (T$$&/'+#!L -!)A+CP1H.(S]
M;7 (,Y"E(8-GNBF)( 6X_T/B$!# D]QU[XD^X "Q< `"]@!@!N8K1#M 1S\7
M0 ! X12:#M:X2P`L<$HJ$(\A<& !H94$:(?8P>)@F+TN'1.@`&#')C/HSA?X
M\3]>@8$P&D"Z(L:$<3H0P/RV^()U%DL$^+/D$!I@@DI^S7DB.!X,/C"#`Z:M
M/33D00-Y2-$&E `(`-@!#H<@`6B>8FLJX(E#*\HX[ 4@%OCDP1,;`82BV `(
MZ?F/RM+3):<.P0<X4-E*<39%1EQP@,,`F@$IPR"F4D8]S-@;*"*"`X\)X0=%
M2<^_J-;4J=Z !['000[XEM90["!I_.2;#H @`*9IM:DU^$':?I!39E2LD4/
M`?\HL.7)090/,>HI7$0HEH.Y_>YR@^@!#G90UV%050>A'81C)7O!G@WB!U;]
MX(2&((.GPBTF+O@(8S];`\@N@@<WL$:)ROH)(,C L"O9776<:0D<@$>SBKS0
M.T.J"8^IP 0T:RZ=WLE13;SS&"&SKG>_"][PBG>\Y"VO><^+WO2J=[WL;:][
MWPO?^,IWOO2MKWWOB]_\ZG>__.VO?_\+X `+>, $+K"!#XS@!"MXP0QNL(,?
M#.$(2WC"%*ZPA2^,X0QK>,,<[K"'/PSB$(MXQ"0NL8E/C.(4JWC%+&ZQBU\,
MXQC+>,8TKK&-;XSC'.MXQSSNL8]_#.0@"WG(1"ZRD8__C.0D*WG)3&ZRDY\,
MY2A+6<@Q( $%KHSE+&>9!#28LI<O00(#&( ")"@[EMAIL PROTECTED]<QB9D&\$/(1
M.'\YPF&.@<Q$T( #1* !"G !<<-,@GA!(']"S+R2"O<T97G4>0@X*`.D)
M#"$($RB `13 H!@8(-"9R,4QBJ%9)!FC;8O(UZ=)C8D_S5!UP]A<"6$0@NK!
MNGHF7-\`JP> ( C!U8?06N?"63'2F:\CV8M%L8@)3A&$% " 6_2[*& `'G3
MTF+VU #$; `"Z$#3G,8%`+X-[EPS`@3A_O:Q#E'NUFWBEQEPW@W9Q@`7<&^&
M\QX&#"+Z47KD3@4'P!W_0#(@_TCB3!#R^^K7QGD#$NX2`B+ @1!4ZNQXA?D"
M!,!V`0CP[0%0VP`"X'8FA)"!<F<`N28)``!,_NV+FJ7<6-,$#%>PN)ZU-$ S
MB!\,;-* -]Y&FB$P8!!P``&/R?)T< L2+9Q721%\P*AS#3I/@ `#6+XQLA%W
M%[2OC6T"),T%&S? M;OMKAKHP+,^\'/:6@"UA'TD82'3`0[@8=J4VM8%7TD0
M(81!"!AT= @KR)<B@-""B)"S[8>N.K+"C'4Q:]TO7?_Z>>4=O%+88*&&WZ('
M.([M;&]]XP5PP*8K[VP,&& $%5?\UDMO``EX'/1S#K/'J#V TXLY`3M8/>N]
M#&T[Z_^@`P00@ 0D, $)"& "$S"L[6\OY3"?@! ]<$$')D" "\R5$(!&OI<U
M/68M+Z `6H:V`>QL_2GSH,HD\$"9SX_^,X,__.QOO_O?#__XRW_^]']-$*"&
M+>8(H;KU]_"@[V9HR_$U_?=>(G(N![@M"8B "\@LF9 S/*$Z##(#/4<9[4 L
M)C ,H#!#7.0")_41,% "+><7G$,9XL$5\* ((% !RL5,:$. Z+4#$9!N,TB#
M-1AN`5!XA_!+.84[;L<`N^$"*& !,( #'%! A?,W4\(!)?!&'F,YED,(QD(9
M`O ]:*-$H50(&F UMZ%R+QA>0H!R-BB&8A@`5 <),*0".=>1,S 0`34@#!X3
M2J#P`HPD-Z=C/$(3!*$D`V$#$F,D/VG"1C P)1: /1TP*23GA>(5!"8R(8U8
M(XYX(H](+9BP$#T$!!4P#''B`CP0!":@`LWD`B;@<(133T/0? ;4.2(@.H:1
M2%Q8,5<X#--E$B24B#:V`NRT"4JT,9'#?[7H8F*U"8JVB+Y(C,5HC,>(C$06
#" `[
`
end
------------------------------
From: "tobiX" <[EMAIL PROTECTED]>
Subject: Squid and Masquerading
Date: Sat, 21 Aug 1999 20:25:55 +0100
Hi,
is possible to run Squid on one Server and Masquerading on an other?
I have a network with 250 win-clients and one machine connected to the
internet via
dialup. Now i installed Squid on another server but the clients can�t reach
the internet over the Proxy.
Is there any point in squid.conf to tell that the server with
dialup-connection is another?
thanks in advance
tobi
my network:
Dialup-Server
(192.168.0.1)---------Squid-Proxy-Server(192.168.0.2)-------(Router)-----Cli
ents(192.168.*.*)
------------------------------
Date: Sun, 22 Aug 1999 03:10:13 -0700
From: Tim Moore <[EMAIL PROTECTED]>
Crossposted-To: alt.comp.periphs.videocards.elsa,comp.os.linux.hardware
Subject: Re: NE2000 PCI installation problems...
turn off PnP in BIOS
--
timothymoore "Everything is permitted. Nothing is forbidden."
bigfoot WS Burroughs.
com
------------------------------
From: "Suddn" <[EMAIL PROTECTED]>
Subject: Re: @Home with Muliple IP addresses and Linux
Date: Sun, 22 Aug 1999 10:13:02 GMT
If you have two NICs in your Linux box, you can configure it to run IP
Masquerading and just use one IP address. You could then give your extra IP
address back and save a few bucks per month.
netmail.home.com wrote in message <[EMAIL PROTECTED]>...
>Hi all,
>
>I've been an Comcast@home subscriber for over half a year, with a RH
>Linux box acting as a gateway for the rest of my network, no problems.
>Now, I am considering getting another IP address. Does anyone have
>exerience with this, and does anyone know if I would have to have 3
>NICs, or 4 in the gateway computer, etc, any other details, advantages,
>disadvantages to doing this?
>
>Thanks for any help,
>
>Paul
>
------------------------------
From: "Van Wambeke" <[EMAIL PROTECTED]>
Subject: Re: My server is refusing telnet sessions!
Date: Sun, 22 Aug 1999 12:00:07 -0600
is the telnetd deamon running?
if it is not try the file /etc/inetd.conf
Suddn a �crit dans le message ...
>My server use to allow me to log on via telnet. Now it just closes the
>connection. (no request for username/password)
>
>I have no idea why?! Need help!
>
>
------------------------------
From: "Robert Rodent" <[EMAIL PROTECTED]>
Subject: Problem with Nics
Date: Sun, 22 Aug 1999 13:35:03 +0200
I got an old 486 and installed linux on it. The machine has a not better
specified Ne2000 compatible ISA-Card (not PnP) and a D-Link 530CT-D. Now the
problem.
If I set up the cards to use the internal Network everything works fine: I
can ping each machine in the network. The Network is a 10base2 net.
When I try to set up one of the two nics to access the internet trough the
cablemodem i have, the internal network on the other still works fine, but
there is no way to get out trough the nic on the cablemodem. I've tried all
the possible configurations and nothing seems to work. I even tried to
reinstall the machine setting up only one nic (the Ne2000) and it still
doesn't work.
This is what ifconfig prints out for eth0:
eth0
link encap:Ethernet HWaddr 00:00:E8:1D:B4:50
inet addr: 194.208.80.235 Bcast:194.208.87.255 Mask:255.255.248.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5860 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
interrupt:10 base address:0x300
route -n prints out the following:
194.208.80.235 0.0.0.0 255.255.255.255 UH 1 0 0 dummy0
194.208.80.0 0.0.0.0 255.255.248.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 lo
0.0.0.0 194.208.80.1 0.0.0.0 UG 0 0 0 eth0
dmesg prints the following for the nic
NE*000 ethercard probe at 0x300: 00 00 e8 1d b4 50
eth0: NE2000 found at 0x300, using IRQ 10
/etc/conf.modules:
alias eth0 ne
options ne io=0x300 irq=10
/etc/route.conf
194.208.80.0 0.0.0.0 255.255.248.0 eth0
default 194.208.80.1
Does someone know whats going on here?
------------------------------
From: "Steve Cowles" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc
Subject: Re: Synchronizing cmos clock with timeserver?
Date: Sun, 22 Aug 1999 12:01:23 GMT
Jeff,
The "net time" command uses nmb/smb services (Samba) as a transport for asking
your linux box to return its current time. I verified this by temporarily
shutting down samba on my linux box. Then, when I issued "net time", I got the
same error message as you. (see below)
Steve Cowles
SWCowles at gte dot net
===========================================
<cut/paste with Samba running>
C:\>net time \\voyager /s /y
Current time at \\voyager is 8/22/99 6:49 AM
The command completed successfully.
C:\>net time \\192.168.9.17 /s /y
Current time at \\192.168.9.17 is 8/22/99 6:49 AM
The command completed successfully.
<cut/paste without samba running>
C:\>net time \\voyager /s /y
System error 53 has occurred.
The network path was not found.
C:\>
C:\>net time \\192.168.9.17 /s /y
System error 53 has occurred.
The network path was not found.
C:\>
Jeff Grossman <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> It is not letting me do it. I am putting net time \\ip address of linux box
> /s /y and it comes back with an error saying it can't find the machine.
>
> Jeff
>
> --
> Jeff Grossman ([EMAIL PROTECTED])
>
>
> Cowles, Steve <[EMAIL PROTECTED]> wrote in message
> news:[EMAIL PROTECTED]...
> > I also use rdate to set my Linux box time using cron. On my Windows
> machines
> > I use the following command to set their time against the Linux box. The
> > "net" command comes with every version of Windows I'm aware of.
> >
> > net time \\linuxbox /s /y
> >
> >
> > Steve Cowles
> >
> > <[EMAIL PROTECTED]> wrote in message
> > news:[EMAIL PROTECTED]...
> > > >> /usr/bin/rdate -s wrzx03.rz.uni-wuerzburg.de
> > >
> > > I'm using RedHat 5.1 on a server right now, and wonder how, if I run
> > > this 'rdate' command when the server dials into its ISP to grab mail,
> > > can I get the Windoze boxes on the network to set their time from the
> > > Linux server?
> > >
> > > In the past, I've used a Windoze utility called D4 but it's overkill
> > > for what I need (I think).
> > >
> > > Can I get Linux to broadcast the time on an SNTP port or something?
> > >
> > > Thanks,
> > > [EMAIL PROTECTED]
> > >
> >
> >
>
>
------------------------------
From: Emmanuel CHILAUD <[EMAIL PROTECTED]>
Subject: Counting traffic on multiple ip adresses ?
Date: Sun, 22 Aug 1999 14:15:12 +0200
Reply-To: [EMAIL PROTECTED]
Hi all !
I'm using a linux RedHat 5.2 server with IP-aliasing on a class C range
of adresses.
I need to have a traffic report by ip every day or week or month.
Are there any free products for that or did someone developped a such
utility ?
Thanks in advance,
Manu
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.networking) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Networking Digest
******************************
