You might be referring to XF86Setup. I believe it's on the RH
6.1 cd, but you will have to install the RPM if you did anything
less than a full install.
On 8 Jun 00, at 2:04, Shane wrote:
> Hello all,
> I'm having problems setting up colour depth with RH.
> I can do it OK with caldera during set up and within the desktop.
> The video card is a voodoo3 2000 and the vdu is a no name that has to use
> interlacing above 800*600. I want to use 800*600, but I can't get it use
> more than 8 bit colour at that res with RH. I even copied down the params
> that were used in caldera. Caldera also does a much better job of probing
> the card. Is there a gui interface for setting up the video in RH like
> there is in caldera or has someone came up with a method like editing
> XF86Config? I might end up installing caldera again and saving the config
> file and hopefully use that if I can and can't work another way of doing
> it. I use text mode to install RH because of lockups in gui mode.
>
> Shane
> http://www.qsl.net/vk3bvp/
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
