On Tue, 20 Jun 2000, Michael Stearne wrote:
> I have looked through the archives, but haven't
> found my problem.
>
> I have 2 ISA Jumperless Addtron 10Mb cards for RH
> 6.1. I have the cards setup for I/O 380 Irq 3 and
> I/O 320 Irq 5. According to /proc/interrupts and /
> proc/ioports and the DOS based PNPsetup program for
> the cards, there are no conflicts.
>
> The problem is this, I can get one card at a time
> working on eth0, but I can't get eth0 and eth1 to
> work at the same time. Both cards use the ne
> driver and when I have one or the other going, the
> /proc/interrupts and /proc/ioports have the NE2000
> label next to the correct irq or port. The files
> that I am editing are /etc/conf.modules and /etc/
> sysconfig/network-scripts/ifcfg-eth0 and ifcfg-
> eth1. Along with those I use linuxconf which only
> seems to srew up the settings of /etc/conf.modules.
>
> My /etc/conf.modules looks like:
> alias eth0 ne
> options ne io=0x380 irq=3
> alias eth1 ne
> options ne io=0x320 irq=5
>
> /etc/sysconfig/network-scripts/ifcfg-eth0:
> DEVICE="eth0"
> IPADDR="192.168.0.2"
> NETMASK=255.255.255.0
> ONBOOT=yes
>
> /etc/sysconfig/network-scripts/ifcfg-eth1:
> DEVICE="eth1"
> IPADDR="My Cable Modem IP"
> NETMASK=255.255.255.0
> ONBOOT=yes
>
>
> Are there other files I am missing settings in?
>
> The message I get is "Bringing Up eth1 : Delaying
> intialization" (not exact, but it says Delaying
> Init, I know)
>
> Thanks,
> Michael
Michael,
I recall seeing a note on this very problem some time ago and I
believe an easy fix was to copy the ne.o module to ne2.o and use the
settings for eth1 to ne2.
This I cant vouch for however.
Warren
* | Warren Hrach, San Diego, CA 92107 | *
* | [EMAIL PROTECTED] Linux & BBBS on an AMD K5 | *
* | BBS at (619}224-4878 | *
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
