Create a separate driver for bq27000 chip. On a later patch,
the old file and cold will be remove and Makefile/Kconfig
updated
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
drivers/power/bq27000.c | 173 +++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 173 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/bq27000.c
diff --git a/drivers/power/bq27000.c b/drivers/power/bq27000.c
new file mode 100644
index 0000000..35a6b67
--- /dev/null
+++ b/drivers/power/bq27000.c
@@ -0,0 +1,173 @@
+/*
+ * bq27000.c - BQ27000 battery driver
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Author: Texas Instruments
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include "../w1/w1.h"
+#include "bq27x00.h"
+
+static struct device *w1_dev;
+
+extern int w1_bq27000_read(struct device *dev, u8 reg);
+
+static inline int bq27000_read(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di)
+{
+ u8 val;
+
+ val = w1_bq27000_read(w1_dev, reg);
+ *rt_value = val;
+
+ if (!b_single) {
+ val = 0;
+ val = w1_bq27000_read(w1_dev, reg + 1);
+ *rt_value += HIGH_BYTE((int) val);
+ }
+
+ return 0;
+}
+
+static void bq27000_work(struct work_struct *work)
+{
+ struct bq27x00_device_info *di = container_of(work,
+ struct bq27x00_device_info, monitor_work.work);
+
+ bq27x00_read_status(di);
+ schedule_delayed_work(&di->monitor_work, 100);
+}
+
+static int __init bq27000_probe(struct platform_device *pdev)
+{
+ struct bq27x00_device_info *di;
+ struct bq27x00_access_methods *bus;
+ int retval = 0;
+
+ di = kzalloc(sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_dbg(&pdev->dev, "could not allocate dev info's memory\n");
+ retval = -ENOMEM;
+ goto err_di;
+ }
+
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus) {
+ dev_dbg(&pdev->dev, "could not allocate bus' memory\n");
+ retval = -ENOMEM;
+ goto err_bus;
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ w1_dev = pdev->dev.parent;
+ di->dev = &pdev->dev;
+ di->bat.name = "bq27000";
+ bus->read = &bq27000_read;
+ di->bus = bus;
+
+ bq27x00_powersupply_init(di);
+
+ retval = power_supply_register(&pdev->dev, &di->bat);
+ if (retval) {
+ dev_dbg(&pdev->dev, "could not register power_supply, %d\n",
+ retval);
+ goto err_psy;
+ }
+
+ INIT_DELAYED_WORK(&di->monitor_work, bq27000_work);
+ schedule_delayed_work(&di->monitor_work, 50);
+
+ return 0;
+
+err_psy:
+ platform_set_drvdata(pdev, NULL);
+ kfree(bus);
+
+err_bus:
+ kfree(di);
+
+err_di:
+ return retval;
+}
+
+static int __exit bq27000_remove(struct platform_device *pdev)
+{
+ struct bq27x00_device_info *di = platform_get_drvdata(pdev);
+
+ flush_scheduled_work();
+ power_supply_unregister(&di->bat);
+ platform_set_drvdata(pdev, NULL);
+ kfree(di->bus);
+ kfree(di);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bq27000_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct bq27x00_device_info *di = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&di->monitor_work);
+ return 0;
+}
+
+static int bq27000_resume(struct platform_device *pdev)
+{
+ struct bq27x00_device_info *di = platform_get_drvdata(pdev);
+
+ schedule_delayed_work(&di->monitor_work, 0);
+ return 0;
+}
+#else
+#define bq27000_suspend NULL
+#define bq27000_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver bq27000_driver = {
+ .driver = {
+ .name = "bq27000",
+ },
+ .probe = bq27000_probe,
+ .remove = __exit_p(bq27000_remove),
+ .suspend = bq27000_suspend,
+ .resume = bq27000_resume,
+};
+
+static int __init bq27x00_init(void)
+{
+ return platform_driver_register(&bq27000_driver);
+}
+module_init(bq27x00_init);
+
+static void __exit bq27x00_exit(void)
+{
+ platform_driver_unregister(&bq27000_driver);
+}
+module_exit(bq27x00_exit);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("BQ27000 battery moniter driver");
+MODULE_LICENSE("GPL");
+
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
