On Sat, Oct 18, 2008 at 12:00:46AM +0300, Felipe Balbi wrote:
> Create a separate driver for bq27200 chip. On a later patch,
> the old file and cold will be remove and Makefile/Kconfig
> updated.
>
> Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
> ---
> drivers/power/bq27200.c | 202
> +++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 202 insertions(+), 0 deletions(-)
> create mode 100644 drivers/power/bq27200.c
>
> diff --git a/drivers/power/bq27200.c b/drivers/power/bq27200.c
> new file mode 100644
> index 0000000..ef03743
> --- /dev/null
> +++ b/drivers/power/bq27200.c
> @@ -0,0 +1,202 @@
> +/*
> + * bq27200.c - BQ27200 battery driver
> + *
> + * Copyright (C) 2008 Texas Instruments, Inc.
> + * Copyright (C) 2008 Nokia Corporation
> + *
> + * Author: Texas Instruments
> + *
> + * This package is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
> + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
> + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
> + *
> + */
> +#include <linux/module.h>
> +#include <linux/param.h>
> +#include <linux/jiffies.h>
> +#include <linux/workqueue.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/i2c.h>
> +
> +#include "bq27x00.h"
> +
> +static struct i2c_client *bq_client;
:-(
Platform device approach would eliminate need for this...
> +static inline int bq27200_read(u8 reg, int *rt_value, int b_single,
> + struct bq27x00_device_info *di)
> +{
> + struct i2c_client *client = bq_client;
> + struct i2c_msg msg[1];
> + unsigned char data[2];
> + int err;
> +
> + if (!client->adapter)
> + return -ENODEV;
> +
> + msg->addr = client->addr;
> + msg->flags = 0;
> + msg->len = 1;
> + msg->buf = data;
> +
> + data[0] = reg;
> + err = i2c_transfer(client->adapter, msg, 1);
> +
> + if (err >= 0) {
Would look better if you swap the success/fail cases:
if (err < 0) {
dev_err();
return err;
}
success-code-here;
> + if (!b_single)
> + msg->len = 2;
> + else
> + msg->len = 1;
> +
> + msg->flags = I2C_M_RD;
> + err = i2c_transfer(client->adapter, msg, 1);
> + if (err >= 0) {
> + if (!b_single)
> + *rt_value = data[1] | HIGH_BYTE(data[0]);
> + else
> + *rt_value = data[0];
> +
> + return 0;
> + } else {
> + dev_dbg(di->dev, "read failed with status %d\n", err);
> + return err;
> + }
> + } else {
> + dev_dbg(di->dev, "write failed with status %d\n", err);
> + return err;
> + }
> +}
> +
> +static void bq27200_work(struct work_struct *work)
> +{
> + struct bq27x00_device_info *di = container_of(work,
> + struct bq27x00_device_info, monitor_work.work);
> +
> + bq27x00_read_status(di);
> + schedule_delayed_work(&di->monitor_work, 100);
> +}
> +
> +static int __init bq27200_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct bq27x00_device_info *di;
> + struct bq27x00_access_methods *bus;
> + int retval = 0;
> +
> + di = kzalloc(sizeof(*di), GFP_KERNEL);
> + if (!di) {
> + dev_dbg(&client->dev, "could not allocate dev info's memory\n");
> + retval = -ENOMEM;
> + goto err_di;
> + }
> +
> + bus = kzalloc(sizeof(*bus), GFP_KERNEL);
> + if (!bus) {
> + dev_dbg(&client->dev, "could not allocate bus' memory\n");
> + retval = -ENOMEM;
> + goto err_bus;
> + }
> +
> + i2c_set_clientdata(client, di);
> + di->dev = &client->dev;
> + di->bat.name = "bq27200";
> + bus->read = &bq27200_read;
> + di->bus = bus;
> + bq_client = client;
> +
> + bq27x00_powersupply_init(di);
> +
> + retval = power_supply_register(&client->dev, &di->bat);
> + if (retval) {
> + dev_dbg(&client->dev, "could not register power_supply, %d\n",
> + retval);
> + goto err_psy;
> + }
> +
> + INIT_DELAYED_WORK(&di->monitor_work, bq27200_work);
> + schedule_delayed_work(&di->monitor_work, 100);
This should be done before registering the power supply. Otherwise
code may use the di->monitor_work before it has initialized.
> + return 0;
> +
> +err_psy:
> + i2c_set_clientdata(client, NULL);
> + kfree(bus);
> +
> +err_bus:
> + kfree(di);
> +
> +err_di:
> + return retval;
> +}
> +
> +static int __exit bq27200_remove(struct i2c_client *client)
> +{
> + struct bq27x00_device_info *di = i2c_get_clientdata(client);
> +
> + flush_scheduled_work();
> + power_supply_unregister(&di->bat);
> + kfree(di->bus);
> + kfree(di);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int bq27200_suspend(struct i2c_client *client, pm_message_t mesg)
> +{
> + struct bq27x00_device_info *di = i2c_get_clientdata(client);
> +
> + cancel_delayed_work(&di->monitor_work);
> + return 0;
> +}
> +
> +static int bq27200_resume(struct i2c_client *client)
> +{
> + struct bq27x00_device_info *di = i2c_get_clientdata(client);
> +
> + schedule_delayed_work(&di->monitor_work, 0);
> + return 0;
> +}
> +#else
> +#define bq27200_suspend NULL
> +#define bq27200_resume NULL
> +#endif /* CONFIG_PM */
> +
> +static const struct i2c_device_id bq27200_id[] = {
> + { "bq27200", 0 },
No need for ", 0".
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, bq27200_id);
> +
> +static struct i2c_driver bq27200_driver = {
> + .driver = {
> + .name = "bq27200",
> + },
> + .probe = bq27200_probe,
> + .remove = __exit_p(bq27200_remove),
> + .suspend = bq27200_suspend,
> + .resume = bq27200_resume,
> + .id_table = bq27200_id,
> +};
> +
> +static int __init bq27200_init(void)
> +{
> + return i2c_add_driver(&bq27200_driver);
> +}
> +module_init(bq27200_init);
> +
> +static void __exit bq27200_exit(void)
> +{
> + i2c_del_driver(&bq27200_driver);
> +}
> +module_exit(bq27200_exit);
> +
> +MODULE_AUTHOR("Texas Instruments");
> +MODULE_DESCRIPTION("BQ27200 battery moniter driver");
> +MODULE_LICENSE("GPL");
> +
> --
> 1.6.0.2.307.gc427
Thanks,
--
Anton Vorontsov
email: [EMAIL PROTECTED]
irc://irc.freenode.net/bd2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
