Create a separate driver for bq27200 chip. On a later patch,
the old file and cold will be remove and Makefile/Kconfig
updated.
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
drivers/power/bq27200.c | 202 +++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 202 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/bq27200.c
diff --git a/drivers/power/bq27200.c b/drivers/power/bq27200.c
new file mode 100644
index 0000000..ef03743
--- /dev/null
+++ b/drivers/power/bq27200.c
@@ -0,0 +1,202 @@
+/*
+ * bq27200.c - BQ27200 battery driver
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Author: Texas Instruments
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+
+#include "bq27x00.h"
+
+static struct i2c_client *bq_client;
+
+static inline int bq27200_read(u8 reg, int *rt_value, int b_single,
+ struct bq27x00_device_info *di)
+{
+ struct i2c_client *client = bq_client;
+ struct i2c_msg msg[1];
+ unsigned char data[2];
+ int err;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ msg->addr = client->addr;
+ msg->flags = 0;
+ msg->len = 1;
+ msg->buf = data;
+
+ data[0] = reg;
+ err = i2c_transfer(client->adapter, msg, 1);
+
+ if (err >= 0) {
+ if (!b_single)
+ msg->len = 2;
+ else
+ msg->len = 1;
+
+ msg->flags = I2C_M_RD;
+ err = i2c_transfer(client->adapter, msg, 1);
+ if (err >= 0) {
+ if (!b_single)
+ *rt_value = data[1] | HIGH_BYTE(data[0]);
+ else
+ *rt_value = data[0];
+
+ return 0;
+ } else {
+ dev_dbg(di->dev, "read failed with status %d\n", err);
+ return err;
+ }
+ } else {
+ dev_dbg(di->dev, "write failed with status %d\n", err);
+ return err;
+ }
+}
+
+static void bq27200_work(struct work_struct *work)
+{
+ struct bq27x00_device_info *di = container_of(work,
+ struct bq27x00_device_info, monitor_work.work);
+
+ bq27x00_read_status(di);
+ schedule_delayed_work(&di->monitor_work, 100);
+}
+
+static int __init bq27200_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bq27x00_device_info *di;
+ struct bq27x00_access_methods *bus;
+ int retval = 0;
+
+ di = kzalloc(sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_dbg(&client->dev, "could not allocate dev info's memory\n");
+ retval = -ENOMEM;
+ goto err_di;
+ }
+
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus) {
+ dev_dbg(&client->dev, "could not allocate bus' memory\n");
+ retval = -ENOMEM;
+ goto err_bus;
+ }
+
+ i2c_set_clientdata(client, di);
+ di->dev = &client->dev;
+ di->bat.name = "bq27200";
+ bus->read = &bq27200_read;
+ di->bus = bus;
+ bq_client = client;
+
+ bq27x00_powersupply_init(di);
+
+ retval = power_supply_register(&client->dev, &di->bat);
+ if (retval) {
+ dev_dbg(&client->dev, "could not register power_supply, %d\n",
+ retval);
+ goto err_psy;
+ }
+
+ INIT_DELAYED_WORK(&di->monitor_work, bq27200_work);
+ schedule_delayed_work(&di->monitor_work, 100);
+
+ return 0;
+
+err_psy:
+ i2c_set_clientdata(client, NULL);
+ kfree(bus);
+
+err_bus:
+ kfree(di);
+
+err_di:
+ return retval;
+}
+
+static int __exit bq27200_remove(struct i2c_client *client)
+{
+ struct bq27x00_device_info *di = i2c_get_clientdata(client);
+
+ flush_scheduled_work();
+ power_supply_unregister(&di->bat);
+ kfree(di->bus);
+ kfree(di);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bq27200_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct bq27x00_device_info *di = i2c_get_clientdata(client);
+
+ cancel_delayed_work(&di->monitor_work);
+ return 0;
+}
+
+static int bq27200_resume(struct i2c_client *client)
+{
+ struct bq27x00_device_info *di = i2c_get_clientdata(client);
+
+ schedule_delayed_work(&di->monitor_work, 0);
+ return 0;
+}
+#else
+#define bq27200_suspend NULL
+#define bq27200_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id bq27200_id[] = {
+ { "bq27200", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, bq27200_id);
+
+static struct i2c_driver bq27200_driver = {
+ .driver = {
+ .name = "bq27200",
+ },
+ .probe = bq27200_probe,
+ .remove = __exit_p(bq27200_remove),
+ .suspend = bq27200_suspend,
+ .resume = bq27200_resume,
+ .id_table = bq27200_id,
+};
+
+static int __init bq27200_init(void)
+{
+ return i2c_add_driver(&bq27200_driver);
+}
+module_init(bq27200_init);
+
+static void __exit bq27200_exit(void)
+{
+ i2c_del_driver(&bq27200_driver);
+}
+module_exit(bq27200_exit);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("BQ27200 battery moniter driver");
+MODULE_LICENSE("GPL");
+
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
