Thanks Philip, I removed the serial cable from the board as well as from PC, also connected JP3 to 1-2.
On WinXP I am getting following message,when I am turning on OSK: "USB Device Not Recongnized.One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it." Status: I am stuck at the start at driver installation. On Linux I am getting following kernel messages (using dmesg),when I am turning on OSK: ..................... usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: device descriptor read/64, error -71 usb 3-1: device descriptor read/64, error -71 usb 3-1: new full speed USB device using uhci_hcd and address 3 usb 3-1: device descriptor read/64, error -71 hub 3-0:1.0: unable to enumerate USB device on port 1 ..................... AFAIK first I need to install USB driver only than I could connect/use OSK board. My problem is with the driver installation in winXP. Could you suggest how to proceed from here? Thanks in Advance. Manoj Kotnala -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Philip Balister Sent: Friday, March 27, 2009 8:10 PM To: [email protected] Subject: Re: Problem in Flashing uboot on OSK5912c Manoj Kotnala wrote: > Hi Experts, > > Sorry this query is not specific to the kernel but to the OMAP/OSK so am > posting it here. > > I am having OSK5912 board (rev C). > I am not getting any boot messages on it. > I tried the Flash Recovery Utility for OMAP from > http://www.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility > But I am not able to install the respective driver in WinXP. > I also tried OSTBoot ver 2.5 from > http://focus.ti.com/download/wtbu/OSTTools_NoSource_v2_5.zip > but couldn't succeed. > It is waiting at "Waiting for USB device to connect" message. > > Next I tried the (Open source) OMAP Flash Loader omapfl from > http://www.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility?action=AttachFile&do=view&target=omapfl-1.0.tar.gz > > Again Failed. > > I inserted debug messages in omapfl source > It seems that OSK Board is not even throwing/publishing VendorID and Product > ID from the board. > > Could anyone tell me how recover the board from this stage? It's been a while, but I think you need to remove the serial cable from the OSK while you do this. I'll no more this weekend, I need to go through the process also :( Philip > > Thanks in Advance, > > Manoj Kotnala > > ============================================================================================================================ Disclaimer: This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review the policy at <a href="http://www.techmahindra.com/Disclaimer.html";>http://www.techmahindra.com/Disclaimer.html</a> externally and <a href="http://tim.techmahindra.com/Disclaimer.html";>http://tim.techmahindra.com/Disclaimer.html</a> internally within Tech Mahindra. ============================================================================================================================ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
