2010/7/16 Gadiyar, Anand <[email protected]>: > Arno Steffen wrote: >> >> I do have some messages while booting a 2.6.33 kernel: >> >> What does this mean? How can I get rid of it? >> What is omap3_clk_lock_dpll5() doing and what if I comment it out? I >> guess it make some sense ;) >> > > Not sure why you have this issue - I'll have to dig a bit, or maybe other > people can comment. But I can tell you what this function is for. > > DPLL5 is used to supply a 120 MHz clock to the USBTLL and the USBHOST > modules. You need this if you are going to use the OMAP's EHCI controller > on your board. > > 120 MHz is the recommended frequency for this DPLL and it is not > recommended to use any other frequency for normal usage. Hence > We lock the DPLL to this frequency at bootup, so that later the > driver can simply do a clk_enable() on the clock it needs and they > will be at this frequency. > > - Anand >
Thanks Anand, I don't have any USB working on the board. If this only for this USB - is it save to comment that out? I do have some trouble with mounting my flash partition. Sometimes I get "uncorrectable errors" (issued by nand_ecc.c) which are disappear in the next boot. The flash is mounted ro, so it should always have the same content. And now I dig around - as I am not sure whether I do have a Flash or a RAM problem or a configuration issue -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
