To support tvout on rx51,added the venc vdac regulator
consumer supply data and also intialised the vdac regulator
with vdac regulator consumer supply data which enables the
power supply to venc through twl4030 on rx51
Signed-off-by: Srikar <ext-srikar.1.bhavanaray...@nokia.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 17 +++++++++++++++--
1 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e56d6d7..ec47402 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -372,6 +372,16 @@ static struct regulator_consumer_supply
rx51_vaux1_consumers[] = {
#endif
};
+static struct regulator_consumer_supply rx51_vdac_supply[] = {
+ {
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+ .supply = "vdda_dac",
+ .dev = &rx51_display_device.dev,
+ },
+#endif
+};
+
+
static struct regulator_init_data rx51_vaux1 = {
.constraints = {
.name = "V28",
@@ -489,14 +499,17 @@ static struct regulator_init_data rx51_vsim = {
static struct regulator_init_data rx51_vdac = {
.constraints = {
+ .name = "VDAC",
.min_uV = 1800000,
.max_uV = 1800000,
+ .apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vdac_supply,
};
static struct regulator_init_data rx51_vio = {
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
