On Wed, May 11, 2011 at 12:23:45PM +0300, Tomi Valkeinen wrote:
> So how should the regulator be set up?
You need to create a new regulator of some kind and then provide a way
for machines to set the supply_regulator in the init_data.
> I should setup a fixed regulator, which is supplied from VCXIO, and
> omapdss will get its powers from this fixed regulator?
Yes, and the example code I've deleted all looks about right.
> static struct fixed_voltage_config omap_dss_fixed_reg_data = {
> .supply_name = "what should this be?",
> .init_data = &fixed_reg_init_data,
> };
The supply name shold be supplied by the board - it's whatever the
supply that's shared by all the regulators in the OMAP is.
> static struct regulator_consumer_supply sdp4430_vcxio_supply[] = {
> REGULATOR_SUPPLY("what should this be?", "reg-fixed-voltage.0"),
> };
You don't need to specify a supply to hook the supplies up. This is a
bit of a wart, but it's the current API - it's specified in the child
regulator rather than the parent which is the other way around to
consumers.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
