On Tue, Jul 05, 2011 at 01:27:47PM +0300, Tero Kristo wrote:
> Introduce a chained interrupt handler mechanism for the PRCM
> interrupt, so that individual PRCM event can cleanly be handled by
> handlers in separate drivers. We do this by introducing PRCM event
> names, which are then matched to the particular PRCM interrupt bit
> depending on the specific OMAP SoC being used.
>
> arch/arm/mach-omap2/prcm.c implements the chained interrupt mechanism
> itself, with individual PRCM events for OMAP3 and OMAP4 being
> described in arch/arm/mach-omap2/prcm3xxx.c and
> arch/arm/mach-omap2/prcm4xxx.c respectively. At initialization time,
> the set of PRCM events is filtered against the SoC on which we are
> running, keeping only the ones that are actually useful. All the logic
> is written to be generic with regard to OMAP3/OMAP4, even though OMAP3
> has single PRCM event registers and OMAP4 has two PRCM event
> registers.
>
...
> +
> + prcm_wkup_irq = omap_prcm_event_to_irq("wkup");
> + prcm_io_irq = omap_prcm_event_to_irq("io");
Should check error return for both.
> +
> + ret = request_irq(prcm_wkup_irq, _prcm_int_handle_wakeup,
> + IRQF_NO_SUSPEND | IRQF_DISABLED, "prcm_wkup", NULL);
>
...
> + for (i = 0; i <= max_irq / 32; i++) {
> + gc = irq_alloc_generic_chip("PRCM", 1,
> + irq_setup->base_irq + i * 32, NULL, handle_level_irq);
> +
Should check NULL return for out of memory.
> + ct = gc->chip_types;
...
> + /* Copy setup from __initdata section */
> + irq_setup = kmalloc(sizeof(struct omap_prcm_irq_setup), GFP_KERNEL);
Check NULL return.
> + memcpy(irq_setup, setup, sizeof(struct omap_prcm_irq_setup));
> +
> + irqs = kmalloc(sizeof(struct omap_prcm_irq) *
> + setup->num_irqs, GFP_KERNEL);
Check NULL return.
> + memcpy(irqs, setup->irqs, sizeof(struct omap_prcm_irq) *
> + setup->num_irqs);
Todd
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
