Hello.
On 26-08-2011 15:11, Ajay Kumar Gupta wrote:
From: Ravi B<ravib...@ti.com>
Adding musb support in ti814 EVM board file.
Signed-off-by: Ajay Kumar Gupta<ajay.gu...@ti.com>
Signed-off-by: Ravi B<ravib...@ti.com>
---
arch/arm/mach-omap2/board-ti8148evm.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-ti8148evm.c
b/arch/arm/mach-omap2/board-ti8148evm.c
index 588d6b7..d9c8505 100644
--- a/arch/arm/mach-omap2/board-ti8148evm.c
+++ b/arch/arm/mach-omap2/board-ti8148evm.c
@@ -23,6 +23,20 @@
#include<plat/irqs.h>
#include<plat/board.h>
#include<plat/common.h>
+#include<plat/usb.h>
+
+static struct omap_musb_board_data musb_board_data = {
+ .set_phy_power = ti81xx_musb_phy_power,
+ .interface_type = MUSB_INTERFACE_ULPI,
+#ifdef CONFIG_USB_MUSB_OTG
+ .mode = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+ .mode = MUSB_PERIPHERAL,
+#endif
Same comments as in the previous patch.
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
