Hi,
>
> On 26-08-2011 15:11, Ajay Kumar Gupta wrote:
>
> > From: Ravi B <[email protected]>
>
> > Adding musb support in ti816 EVM board file.
>
> > Signed-off-by: Ajay Kumar Gupta<[email protected]>
> > Signed-off-by: Ravi B<[email protected]>
>
> As far as I know, full name is required in signoff.
Ok.
>
> > ---
> > arch/arm/mach-omap2/board-ti8168evm.c | 15 +++++++++++++++
> > 1 files changed, 15 insertions(+), 0 deletions(-)
>
> > diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-
> omap2/board-ti8168evm.c
> > index e516a04..77200d4 100644
> > --- a/arch/arm/mach-omap2/board-ti8168evm.c
> > +++ b/arch/arm/mach-omap2/board-ti8168evm.c
> > @@ -23,6 +23,20 @@
> > #include<plat/irqs.h>
> > #include<plat/board.h>
> > #include<plat/common.h>
> > +#include<plat/usb.h>
> > +
> > +static struct omap_musb_board_data musb_board_data = {
> > + .set_phy_power = ti81xx_musb_phy_power,
> > + .interface_type = MUSB_INTERFACE_ULPI,
> > +#ifdef CONFIG_USB_MUSB_OTG
> > + .mode = MUSB_OTG,
> > +#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
> > + .mode = MUSB_HOST,
> > +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
> > + .mode = MUSB_PERIPHERAL,
> > +#endif
>
> This #ifdef'ery is not longer necessary afetr this patch:
>
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-
> 2.6.git;a=commit;h=75a14b1434a0ca409bcc8ab9b6b2e680796c487e
Got it, so it should be only.
+ .mode = MUSB_OTG
Due to the below patch:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=622859634a663c5e55d0e2a2cdbb55ac058d97b3
The .mode is still being passed to musb->board_mode which is used for below
definitions.
#define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST)
#define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL)
#define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG)
Thanks,
Ajay
>
> WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html