[PATCH 13/28] ARM: OMAP: Beagle: use new TFP410 platform driver

[Tomi Valkeinen]

Use the new TFP410 platform driver instead of the old omap_dss_driver.

Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c 
b/arch/arm/mach-omap2/board-omap3beagle.c
index c3558f9..1b65e92 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -224,17 +224,18 @@ static struct mtd_partition omap3beagle_nand_partitions[] 
= {
 
 /* DSS */
 
-static struct tfp410_platform_data dvi_panel = {
-       .i2c_bus_num = 3,
-       .power_down_gpio = -1,
+static struct tfp410_platform_data omap4_tfp410_pdata = {
+       .name                   = "dvi",
+       .source                 = "dpi.0",
+       .i2c_bus_num            = 3,
+       .data_lines             = 24,
+       .power_down_gpio        = -1,
 };
 
-static struct omap_dss_device beagle_dvi_device = {
-       .type = OMAP_DISPLAY_TYPE_DPI,
-       .name = "dvi",
-       .driver_name = "tfp410",
-       .data = &dvi_panel,
-       .phy.dpi.data_lines = 24,
+static struct platform_device omap4_panda_tfp410_device = {
+       .name                   = "tfp410",
+       .id                     = 0,
+       .dev.platform_data      = &omap4_tfp410_pdata,
 };
 
 static struct omap_dss_device beagle_tv_device = {
@@ -245,14 +246,13 @@ static struct omap_dss_device beagle_tv_device = {
 };
 
 static struct omap_dss_device *beagle_dss_devices[] = {
-       &beagle_dvi_device,
        &beagle_tv_device,
 };
 
 static struct omap_dss_board_info beagle_dss_data = {
        .num_devices = ARRAY_SIZE(beagle_dss_devices),
        .devices = beagle_dss_devices,
-       .default_device = &beagle_dvi_device,
+       .default_display_name = "dvi",
 };
 
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -316,7 +316,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
                if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
                        pr_err("%s: unable to configure EHCI_nOC\n", __func__);
        }
-       dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
+       omap4_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
 
        gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
                        "nEN_USB_PWR");
@@ -450,6 +450,7 @@ static struct platform_device *omap3_beagle_devices[] 
__initdata = {
        &keys_gpio,
        &madc_hwmon,
        &leds_pwm,
+       &omap4_panda_tfp410_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html