Use the new TFP410 platform driver instead of the old omap_dss_driver.
Signed-off-by: Tomi Valkeinen <[email protected]>
---
arch/arm/mach-omap2/board-igep0020.c | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/board-igep0020.c
b/arch/arm/mach-omap2/board-igep0020.c
index bf92678..28d0b3e 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -430,30 +430,26 @@ static struct twl4030_gpio_platform_data
igep_twl4030_gpio_pdata = {
};
static struct tfp410_platform_data dvi_panel = {
+ .name = "dvi",
+ .source = "dpi.0",
+ .data_lines = 24,
.i2c_bus_num = 3,
.power_down_gpio = IGEP2_GPIO_DVI_PUP,
};
-static struct omap_dss_device igep2_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
- .name = "dvi",
- .driver_name = "tfp410",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
-};
-
-static struct omap_dss_device *igep2_dss_devices[] = {
- &igep2_dvi_device
+static struct platform_device igep2_dvi_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &dvi_panel,
};
static struct omap_dss_board_info igep2_dss_data = {
- .num_devices = ARRAY_SIZE(igep2_dss_devices),
- .devices = igep2_dss_devices,
- .default_device = &igep2_dvi_device,
+ .default_display_name = "dvi",
};
static struct platform_device *igep_devices[] __initdata = {
&igep_vwlan_device,
+ &igep2_dvi_device,
};
static int igep2_keymap[] = {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
