Hi, I recently was delegated the task of cleaning up some of the Sensu alerts... As such, check_openmanage was reporting for a bunch of systems :
# ./check_openmanage Voltage sensor 0 [CPU1 VCORE PG] is Unknown reading Controller 0 [PERC H310 Mini]: Firmware '20.13.0-0007' is out of date Voltage sensor 1 [CPU2 VCORE PG] is Unknown reading Voltage sensor 4 [CPU2 PLL PG] is Unknown reading Voltage sensor 5 [CPU1 PLL PG] is Unknown reading Voltage sensor 7 [CPU1 M23 VDDQ PG] is Unknown reading Voltage sensor 8 [CPU1 M23 VTT PG] is Unknown reading Voltage sensor 10 [CPU2 VSA PG] is Unknown reading Voltage sensor 11 [CPU1 VSA PG] is Unknown reading Voltage sensor 12 [CPU2 M01 VDDQ PG] is Unknown reading Voltage sensor 13 [CPU1 M01 VDDQ PG] is Unknown reading Voltage sensor 14 [CPU2 M23 VTT PG] is Unknown reading Voltage sensor 15 [CPU2 M01 VTT PG] is Unknown reading Voltage sensor 17 [CPU2 VTT PG] is Unknown reading Voltage sensor 18 [CPU1 VTT PG] is Unknown reading Voltage sensor 19 [CPU2 M23 VDDQ PG] is Unknown reading Voltage sensor 23 [System Board BP1 5V PG] is Unknown reading Voltage sensor 24 [CPU1 M01 VTT PG] is Unknown reading I thought I had previously read that upgrading to OMSA 8 would fix this, so went all the way to 8.5.0. Unfortunately, same thing. I even loaded the srvadmin-idrac7 and srvadmin-idracadm7 just in case, still same issue. I thought this had been beaten to death and upgrade was the answer, but doesn't seem to be working. I even upgraded the plugin to 3.7.12. But omreport confirms : Index : 1 Status : Unknown Probe Name : CPU2 VCORE PG Reading : Minimum Warning Threshold : [N/A] Maximum Warning Threshold : [N/A] Minimum Failure Threshold : [N/A] Maximum Failure Threshold : [N/A] Thoughts where to go next? Thanks, Tuc _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
